Hermle Spade
5, 7, 9 inch dial diameters. These are to fit most German mechanical clock movements
$15
Item #CH1
MECHANICAL CLOCK HANDS
Terry Style
For 9" dial diameter. Heavy steel hands with pilot holes. Measurements from the minute hands hole to the end is 4 1/2 inch
$13
Item #CH2
Hermle Serpentine
4 to 10 inch dial diameters. These fit most German movements.
$15
Item #CH3
Terry Style
Terry clock hands with pilot holes so they can be adapted to movements. For 9" dial diameter
$17
Item #CH12
Seth Thomas
Available for 3 1/2 or 5 1/2 inch dial diameters. For American antique movements. This has a sqare hole in the minute hand.
$10
Item #CH6
Hermle Hands
Regulator style hands bushed to fit Hermle clock movements. 5 or 7 inch dial diameters.
$22
Item #CH14
Pierced Spade
For 5 inch dial diameter. Minute hand has a square hole. For American antique movements.
$10
Item #CH8
Regulator A
Regulator "A" hands. An exact copy of the hands used on the Ansonia Regulator A of the late 1800's. Fits an 11" dial. Square minute hand hole.
$12
Item #CH17
Spade Hands
3 1/2 to 11 inch dial diameters. Specify square or oblong minute hand hole. For American antique movements
$10
Item #CH11
Battery Operated Hands
Free with Movement
Item# - H1
Item# - H2
Item# - H3
Item# - H4
Item# - H5
Item# - H6
Item# - H7
Item# - H8
Item# - H9
Item# - H10
Item# - H11
Minute hand measured from the hole to tip. Hour hand that comes with the set is smaller proportionally
Battery Mvt Seconds $1.00ea
Item# - SH1
Item# - SH2
Item# - SH3
Item# - SH4
Long Hands for High Torque Battery Mvts
(Measured from the center of the hole to the end of the minute hand. Hour hands just come proportionally smaller)
Item # - HTH1
Comes in three long lengths
Item # - HTH2
6 Inch Length
Item # - HTH3
Comes in five long lengths
Item # - HTH4
Four lengths to choose from
Item # - HTH5
6 inch Length
Want to get in touch?
Send us an E-Mail