Chime
Hammer
These are to replace missing hammers and come in 3 sizes. Easy to mount with the included set screw on the end.
Item #CP1
$4
CLOCK PARTS
These are to replace missing hammers and come in 3 sizes. Easy to mount with the included set screw on the end.
Item #CP1
$4
100 Brass tapered pins with various diameters. These have many uses in clock repair. They attach some dials, movement plates, suspensions and sometimes hands on the clock.
Item #CP2
$13
The wires are preinstalled on the 3 clicks and come with 3 rivets to attach them to the main wheel. Used on many American 8 day time/strike movements. Use caution and read up first in our Ebook before working with mainsprings.
Item #CP7
$8
Round flat - Item # CP4
$8
Round convex - Item # CP5
50 Mixed sized clicks and rivets. Clicks hold the mainspring in the coiled position during and after winding the clock. Use caution and read up first before working with mainsprings.
Item #CP8
$13
100 Assorted mixed clock hand washers. These go on top the minute hand on some clocks to maintain tension so the hand does not flop around.
Item #CP21
$9
Pendulum nut for floor and wall clocks. Turning the nut so to raise the bob will speed up the clocks time, lowering the bob will slow the clocks time.
Item #CP11
$5
12 Assorted hand nuts for German movements. With this assortment of hand nuts you will get one for your German movement with no problem.
Item #CP25
$13
This coil gong has a brass bushing that enables it to be attached to a base. The diameter of the coil gong is 4 inches across. This gong includes the base.
Item#GO4
$16
Brass decorative spiral finial that is very heavy for its size. This is the top decoration for a grandfather clock case. The finial is 4 1/2 inches tall.
Item#CP26
$20
Brass decorative eagle finial that is very heavy for its size. This is the top decoration for a grandfather clock case. The finial is 4 1/2 inches tall.
Item#CP27
$20
Black metal case back for sound quality and dust protection on a mantel clock case.
Item #CP20
$6
12 American hand nuts. These hand nuts fit the most antique clock movements that are made in the USA. They come mixed in steel and brass colorations.
Item #CP17
$10
C Clips are used for holding some styles of gears and arbors in place. They are used in all modern movements including cuckoo clocks.
Item #CP35
$10
Brass hook and ring for floor clock weights. The picture is not what you get and will be fixed soon. What is being sold is a heavy hook and ring set for modern (1965+) floor clocks.
Item #CP43
$3pr
Split washers are similar to C clips as they attach some wheels on there arbors. These are usually used more on cuckoo clocks. There is 100 various sizes in this pack.
Item #CP36
$10
These clock nuts are the size common in many movements including cuckoos. This is an assortment of 100 various sized clock nuts that are common in clock repair.
Item #CP24
$9
A variety of small wood screws for attaching movements to there cases. Packet of 50.
Item #CP19
$9
Solid brass bushings in a pack of 100 assorted outside and inside diameters. Made in India. The bushings included in this pack are mainly for smaller pivot diameters.
Item #CP46
$15
Smaller machine style screw assortment that comes in a pack of 100. Some clocks have these attaching the suspension post to the movement and etc.
Item #CP3
$9
Take a section of your old chain and count the links so it matches the LPF (links per foot) that are on the drop down menu below. Most one day cuckoo clocks take 61LPF. All Hermle chain driven units take 46.5LPF
Item #CU28
A verge is what whacks the pendulum back and forth and engages with the escape wheel. Variety pack of 9. Bend and cut them to fit your application. These are for front escapement movements.
Item #CU28
$20
Ready to install, factory replacement cable for Hermle floor clocks Complete with brass end fittings .047" thickness x 61" long
Item #CP15
$19
Moon gear for Hermle floor clocks. Please choose your movement number from the back plate of the movement itself.
Item #CP105
$13