Concentrated clock cleaning solution
One pint of concentrated ammoniated clock cleaning solution
that can be used to clean movements by hand, or to use with a ultrasonic
cleaning machine. Just mix 1 part of this solution to 8 -12 parts of water to
clean old clock oil from the movement. The E-book that is included with this kit
has instructions on how to clean the clock movement in the best and safest way,
so refer to it before starting the cleaning process.
Included in Kit
 Clock
Repair E-Book
This Electronic book makes it easy for anyone to fix most of
the problems that prevent clocks from running properly. It is written for people
who have never tried clock repair. Teaches how clocks work and how to fix things
that go wrong, without sophisticated and expensive tools. With helpful
illustrations and easy to read text, it will lead you, step by step, to correct
problems that keep clocks from running and striking. It is the very best
beginners clock repair reference.
Included in Kit
Split Washers
This is an assortment of split washers to replace the broken,
lost, or distorted.
Included in Kit
 Replacement
Bellow Tops
It is a common thing for bellows to rip open when they are old.
These replacement tops attach to the bottom part of the bellows easily with
epoxy. Epoxy is also included with this kit. These bellow tops are the common
size of 1 3/4 x 1 1/4 inches, but any size you would like can be replaced with
this size. We have all sizes in stock.
Included in Kit
Cuckoo Wire Assortment
Assortment of cuckoo bellow wire, door wire, lift wire and more.
Included in Kit
 Hooks
and Rings
2 sets of hooks and rings, making a package of 4 pieces total.
These are commonly missing or lost.
Included in Kit
Wood Screw Assortment
This wood screw assortment has many screws that are nicely sized
for cuckoos.
Included in Kit
 Level
and Clock Oil
The level is needed to be sure the clock stays in beat from
one place to another. Learn to set the clock in beat by the directions in the
E-book, making sure the clock is level when it is being done. Then keep a level
with the clock and where ever the clock goes, as long as its level, it will be
in beat. By being in beat, it means to have an even tick-tock-tick-tock rather
than ticktock---ticktock---ticktock. Often many repairs ONLY need to be set in
beat to work - however a cleaning is usually suggested anyhow. The oiler is full
of oil and are the size of a fat pen. A Small amount of oil gets applied to
anything that has friction after the old oil is cleaned off. This is enough
clock oil to do many clock movements.
Included in Kit
Clock Hand and Gear Puller
This tool is to remove tight hands and gears by pulling in a
straight motion. The left and right jaws goes under the object such as a
stubborn clock hand and then the center screws down and pushes on the center
post of whatever it is you pulling off.
Included in Kit
 Epoxy
The best to use when attaching bellow tops to bellow bottoms.
Also is great for repairing any other broken cuckoo clock case parts. Clear,
strong, and fast drying.
Included in Kit
 Vision
Visor
This magnifier can be worn over glasses. This fits over the
head and will be the most convenient magnification for inspecting important
components of the clock movement and parts. This quality tool is made here in
USA and is a must for this type of work. This flips up over the head when there
is an interruption in your work and has 2 1/2 magnification power.
|
