CUCKOO PARTS
More convenient than replacing the tops, replace the bellow completes with this pair. This eliminates having to epoxy the new top onto the tube when it is time to replace the cloth. These come in a set of two bellow completes. Size is the length of the tube. Sizes longer than 5" are plus $9
Item #CU1-- $19pr
What side opening means is that when it is installed, the bellow tops run the along side of the clock case. With the back opening bellows next door, the bellow tops stick out toward the movement rather than the running along the side of the case. Size is the length of the tube. Sizes longer than 5" are plus $9
Item #CU2-- $19pr
Amazing this item is still available for the antique cuckoos. (The trapezoid bellow tops with leather is discontinued.)
These have the regular bellow material as the ones next door but have the unique antique shape. 2 1/4 x 2 tapers to 1 inch
Item #CU3-- $22pr
Bellow tops are the most frequently needed item on a old cuckoo clock. These get epoxied on the old bottoms just as the old tops were taken off, see the help section for details. Recommended to also get the wire assortment with this if there are any missing wires such as lifting wires.
Item #CU4-- $13pr
One day cuckoo clocks usually take the same amount of weight on each weight. So if your missing a weight or two, just look and the number stamped into your old weight and get this same gram amount from the list below.
Item #CU6
Assortment of twelve hand bushings for cuckoo clocks. The hands are installed in this order: Hour hand goes on first as a friction fit, it just slides on the hour tube. Then comes one of these bushings on the square minute hand shaft. Then comes the minute hand with the round hole and the hand nut to pinch the minute hand against the bushing.
Item #CU7-- $11
Cuckoo clock antlers made of sturdy plastic with a wooden look. Antlers are for the decorative hunter style head dressings that have a deer head in the center. Often the original deer heads came with frail wood antlers that eventually broke when the clock is stored. These plastic antlers will not break as easily.
Item #CU8-- $12
These are sold in single lengths. The 60lpf is most common for the one day cuckoo's and the 48lpf is most used with the 8 day. Take a section of your old chain and count the links so it matches the LPF (links per foot) that are on the drop down menu below.
Item #CU28
Cuckoo dials made of real wood with white celluloid Roman numerals. Available in sizes between 60mm and 130mm.
Dials are usually attached by three Small nails, not included. Sometimes the dials are epoxied on, we sell epoxy on this same page.
Item#CU15
Cuckoo white celluloid hands with the bushing. Size indicates length of the minute hand, From the center of the hole to the end. These come with a special brass bushing for the minute hand. See help for installation tips.
Item#CU12 -$9pr
Three inch cuckoo bird that opens its mouth when the tail is lifted. This is a white plastic bird with blue wings. It is installed by one set screw that tightens it up against the wire it rides upon.
Item #CU10--$8
Celluloid plastic numerals than can be epoxied to the cuckoo dial if numbers are missing. There are many sizes to choose from in the dropdown menu below. The option is also open for a whole new dial sold to the left. Comes as one set of Roman numerals from one to twelve.
Item#CU14-$7
This assortment saves you from going to the hardware store, getting the proper thickness of wire and attempting to make your own bends. Includes bellow lifting wires in various lengths, eye hole wires, cuckoo bird door wires and the bird to door wire.
Item #CU5--$12
This is the more common bellow material, also to replace ripped or worn bellow tops. The dimensions of the cloth are 12 x 12 and the price is per sheet. It is much easier to get the bellow tops instead, with the cloth already on them. See the top row of this page for bellow tops.
Item #CU27--$12
Precision pen oiler that is filled with cuckoo clock oil. The applicator makes it easy to oil hard to reach pivot holes. The level is to be used when putting the cuckoo clock in beat. These terms are described in the help section.
Item #CU18--$15
The cuckoo clock epoxy we offer may vary in manufacturers or titles and it will be good for bellow top replacement. The epoxy is also good for attaching numerals to dials and repairing broken wood on a head dressing.
Item #CU19--$4
These are the nuts that hold the two outer plates to there pillars. This hex nut assortment contains 100 pieces.
Item #CU21--$8
Split washers are sometimes also known as E-Clips. These E-Clips are used on cuckoo movements to hold lifting levers and other parts into there places.
Item #CU22--$8
The hook goes on one end of the chain to hold the weight up. The ring goes on the other side of the same chain so the chain will not travel into the movement and onto the ground. Sold as one hook and one ring as a set.
Item #CU23--$2pr
Stainless steel tweezers in a package of five. These are used in cuckoo repair when manipulating wire to go where you want them to among other things. They come in different styles so there will be the right one for the particular application.
Item #CU24--$15
This Chalet style pendulum is for one day cuckoo clocks only. The leaf is 2 inch wide by 2 1/4 inch tall. The rod that the leaf is on is 7 inches long. To speed the clocks time, raise the leaf on its rod, to slow time just lower the leaf.
Item #CU31--$15
This hand carved Oak Leaf Pendulum is for eight day cuckoo clocks only. The leaf is 2 1/2 inch wide by 4 inches tall. The rod that the leaf is on is 7 inches long. To speed the clocks time, raise the leaf on its rod, to slow time just lower the leaf.
Item #CU30--$17
Sizes listed are the size of the maple leaf on the pendulum stick, the stick itself is 7 inches long. These pendulums are available in brown (BR), blonde (BL), or green (GR) To speed the clocks time, raise the leaf on its rod, to slow time just lower the leaf.
Item #CU13--$15
These threaded nuts go onto the cuckoo clock to secure the minute hand. They get lost often for some reason. They come in an assortment so you will be sure to get the correct nut for the job.
Item #CU33--$13
Hand carved top, measured end to end. These tops are available in brown (BR), blonde (BL), or green (GR) or unfinished (UN)
Item #CU32
Hand carved top with plastic antlers, measured end to end. These tops are available in brown only.
Item #CU33
This is what you will need to mount the head dressing on a cuckoo clock. Its either this or you would have to use epoxy, this is the better way.
Item #CU34 - $2.50pr
