|
|
|
ELECTRIC MOVEMENTS
Lanshire ElectricElectric movement that mounts to the dial with a 1/2 hand shaft. Entire unit is 2 1/2 x 1 7/8 x 1 3/8. This is easy to install and good for replacing worn out movements. EL1 - $49 |
Hansen Synchron Motor to replace bad units. 1RPM, 60CC. Complete with a 10 tooth pinion.
EL2 - $39 |
Hansen Bottom Set Bottom set movement with either 5/8" or 7/8" handshaft. Movement is 3 1/4" high x 2 1/4" wide x 1 15/16" deep.
EL3 - $66
|
Hansen Rear Set Rear set movement with either 5/8 or 7/8 handshaft. Movement is 3 1/4" high x 2 1/4" wide x 1 15/16" deep.
EL4 -$66
|
|
Golden Hour replacement motor supplied with a 27 tooth gear. EL5 - $54 |
Spartus model 58 electric striking penulum movement. Pendulum included but is optional. Chime rod, mounting hardware and hand nut NOT included. 120V, 60Hz EL6 - $19 |
Replacements for B type rotor assemblies. These simplex motors will replace the entire field, coil, and rotor assembly. These are non reversible and have 20 times more torque than a rotor. For telechron units. 60cycles 1RPM. EL7 - $54 |
EL8 - $59 |
|
Uses standard "I" shaft
hands. This mini electric movement comes in 3 various post lengths. The
post length is the threaded portion of the hand shaft that the hex nut
goes on only. |
|
|
|
Clockworks.com |
|