Clockworks

View Cart

Clock Repair Help

HERMLE MOVEMENTS

We offer only the best grade of clock movements with no plastic components

Every clock movement comes with a 2 year warrantee

• Less cost than a cleaning in most cases
• Should last 25-30 years, a repair would not
• Easy to install, we can help if needed
• Ships same day as order

HOW TO ORDER:

Find the model number on the back of the clock movement that match the numbers on this list. Usually there is three or four numbers followed with a dash (-) and then another set of three or four numbers. Then find the centimeter length, just below the model number, it looks something like this (66CM). This centimeter length represents the length of the pendulum measured from the suspension post down to the very bottom of the threads on the rating nut. (If the clock has one). Match these up to the list and you have a brand new movement that will replace your broken one.

Movements may vary from the Picture

The matching of the movement number is what makes the difference, if the old movement number matches on the list, then you will get that exact same movement.

NOTE:

Many of the HERMLE MOVEMENTS have been improved upon by the factory over time. Some have bronzed bushings in key wear areas to increase the life of the movement, and on the non-pendulum units the balance has been improved upon for longer life and ease of timing.

1161-853 94, 100, 114CM Pendulum Hand shaft 53.2mm 12 Hammer back Plate Size 140 x 200mm Cable driven Takes a #8 crank	Movement $399 Picture 1161-853 94CM 114CM 94CM AUTONIGHT +$45 114CM AUTONIGHT +$45	1161-053 94cm, 114cm pendulums 53.2 HandShaft 12 Hammer back Plate Size 140 x 200mm Chain driven	Movement $399 Picture 94CM 114CM
1161-850 94, 114CM Pendulum Hand shaft 33.2mm 12 Hammer back Plate Size = 140 x 200mm Cable driven Takes a #8 crank	Movement $399 Picture 94CM 100CM 114CM

130+131+132	140+142	241	261	340+341	350+351
451	461+471	1050+1051	1151	1161	1171