HERMLE MOVEMENTS

We offer only the best grade of clock movements with no plastic components

Every clock movement comes with a 2 year warrantee

  • Less cost than a cleaning in most cases
  • Should last 25-30 years, a repair would not
  • Easy to install, we can help if needed
  • Ships same day as order

HOW TO ORDER:

Find the model number on the back of the clock movement that match the numbers on this list. Usually there is three or four numbers followed with a dash (-) and then another set of three or four numbers. Then find the centimeter length, just below the model number, it looks something like this (66CM). This centimeter length represents the length of the pendulum measured from the suspension post down to the very bottom of the threads on the rating nut. (If the clock has one). Match these up to the list and you have a brand new movement that will replace your broken one.

Movements may vary from the Pictures

The matching of the movement number is what makes the difference, if the old movement number matches on the list, then you will get that exact same movement.

NOTE:

Many of the Hermle clock movements have been improved upon by the factory over time. Some have bronzed bushings in key wear areas to increase the life of the movement, and on the non-pendulum units the balance has been improved upon for longer life and ease of timing.

130-020


Balance Escapement
3 Hammer below / bim bam
Plate size = 90mm round
Spring driven
Takes a #4 key 		Movement $179
PictureHermle Clock
 

 

131-070


21CM  Pendulum
Hand shaft = 33.2mm
2 Bells back / bim bam
Plate size = 90mm round
Spring driven
Takes a #4 key
  		Movement $179
PictureHermle Clock

 

130-070


Balance Escapement
2 Bells back / bim bam
Plate size = 90mm  round
Spring driven
Takes a #4 key 		Movement $179
PictureHermle Clock

 

131-071


18CM  Pendulum
Hand shaft = 27.6mm
2 Bells back / bim bam
Plate size = 90mm round
Spring driven
Takes a #4 key
  		Movement $179
PictureHermle Clock

 

130-080


Balance Escapement
2 Bells top / bim bam
Plate size = 90mm  round
Spring driven
Takes a #4 key 		Movement $179
PictureHermle Clock

 

131-080


21, 23CM  Pendulum

21cm requires regearing
($20)
Hand shaft = 33.2mm
2 Bells top / bim bam
Plate size = 90mm round
Spring driven
Takes a #4 key
 

 Movement $179
PictureHermle Clock

 


130-627


Balance Escapement
3 hammer below / back wind / bim bam
plate size = 90mm  round
Spring driven
Takes a #4 key
  		Movement $179
PictureHermle Clock

 

132-071


11 Jewel escapement
1 Bell back - ships bell strike
Plate size = 90mm round
Spring driven
Takes a #4 key
  		Movement $359
PictureHermle Clock

 

131-030


21, 32.5, 35, 39, 45, 55CM  Pendulum

31cm (special order +$20)
Hand shaft = 33.2mm
3 Hammer side / bim bam
Plate size = 90mm round
Spring driven
Takes a #4 key
 

 Movement $179
PictureHermle Clock

 

 

Select the beginning part of the Hermle number below for movement details

130+131+132 140+142 241 261 340+341 350+351
451 461+471 1050+1051 1151 1161 1171
Want to get in touch? Send us an E-Mail