Hermle Clock Movement at Wholesale

HERMLE MOVEMENTS

We offer only the best grade of clock movements with no plastic components

Every clock movement comes with a 2 year warrantee

Less cost than a cleaning in most cases
Should last 25-30 years, a repair would not
Easy to install, we can help if needed
Ships same day as order

HOW TO ORDER:

Find the model number on the back of the clock movement that match the numbers on this list. Usually there is three or four numbers followed with a dash (-) and then another set of three or four numbers. Then find the centimeter length, just below the model number, it looks something like this (66CM). This centimeter length represents the length of the pendulum measured from the suspension post down to the very bottom of the threads on the rating nut. (If the clock has one). Match these up to the list and you have a brand new movement that will replace your broken one.

Movements may vary from the Picture

The matching of the movement number is what makes the difference, if the old movement number matches on the list, then you will get that exact same movement.

NOTE:

Many of the HERMLE MOVEMENTS have been improved upon by the factory over time. Some have bronzed bushings in key wear areas to increase the life of the movement, and on the non-pendulum units the balance has been improved upon for longer life and ease of timing.

140-010 No Calandar - we will remove hand shaft 33.2mm Balance escapement 3 Hammer below / bim bam Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture	141-033K 66CM Pendulum Calendar movement Hand shaft 53.2mm Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $219 Picture
140-070 No Calandar - we will remove Hand shaft 33.2mm Balance escapement Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229	141-040 29, 38, 43, 45, 55, 94CM No Calandar - we will remove 66CM (Regearing +$20) 11CM (Regearing +$20) Hand shaft 33.2mm Back hammer Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture ]
141-010 11CM Pendulum 45, 48CM(Regearing +$20) No Calandar - we will remove 3 hammer below / bim bam Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture	141-040K 38, 43, 45, 55, 94CM Pendulum 11CM (Regearing +$20) Calendar movement Hand shaft 33.2mm 1 Hammer back / gong Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $219 Picture
141-020 21, 32, 45, 52, 75CM 55cm =Regear +$20 Pendulum Hand shaft 33.2mm No Calandar - we will remove One hammer below Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture	141-041 25, 32, 38, 43, 45CM Pendulum No Calandar - we will remove Hand shaft 27.6mm Back hammer Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture
141-023 21, 31, 45CM Pendulum 21cm Regearing+$20 No Calandar - we will remove Hand shaft 53.2mm One hammer below Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture	141-071 29, 38,45, 55, 66CM Pendulum No Calandar - we will remove Hand shaft 27.6mm Back hammer Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture
141-030 34, 38, 45, 55, 66, 75CM 29, 94CM = Regearing +$20 No Calandar - we will remove 3 Hammer side / bim bam Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture	141-070 29, 38,45, 55, 66CM Pendulum 38cm = Regearing +$20 No Calandar - we will remove Hand shaft 33.2mm Back hammer Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture
141-030K 38, 45, 48, 66, 75CM Pendulum 3 Hammer side / bim bam Calendar movement Hand shaft 33.2mm Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $219 Picture	141-070K 29, 38, 43, 45, 55, 66CM Pendulum Calendar movement Hand shaft 33.2mm Back hammer Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $219 Picture
141-031 32CM Pendulum 38CM = Regearing +$20 No Calandar - we will remove Hand shaft 27.6mm Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture	141-080 21 CM Pendulum No Calandar - we will remove Hand shaft 33.2mm 2 Bells top / bim bam Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture
141-033 38CM Pendulum No Calandar - we will remove Hand shaft 53.2mm Plate size = 85 x 98mm FRONT OR REAR PENDULUM Spring driven Takes a #8 key	Movement $229 Picture	140-080 Hand shaft 33.2mm No Calandar - we will remove Balance escapement 2 Bells top / bim bam Plate size = 85 x 98mm Spring driven Takes a #8 key	Movement $229 Picture

Select the beginning part of the Hermle number below for movement details

130+131+132	140+142	241	261	340+341	350+351
451	461+471	1050+1051	1151	1161	1171

Want to get in touch? Send us an E-Mail