HERMLE MOVEMENTS

We offer only the best grade of clock movements with no plastic components

Every clock movement comes with a 2 year warrantee

  • Less cost than a cleaning in most cases
  • Should last 25-30 years, a repair would not
  • Easy to install, we can help if needed
  • Ships same day as order

HOW TO ORDER:

Find the model number on the back of the clock movement that match the numbers on this list. Usually there is three or four numbers followed with a dash (-) and then another set of three or four numbers. Then find the centimeter length, just below the model number, it looks something like this (66CM). This centimeter length represents the length of the pendulum measured from the suspension post down to the very bottom of the threads on the rating nut. (If the clock has one). Match these up to the list and you have a brand new movement that will replace your broken one.

clockworks MOVEMENT

Movements may vary from the Picture

The matching of the movement number is what makes the difference, if the old movement number matches on the list, then you will get that exact same movement.

NOTE:

Many of the HERMLE MOVEMENTS have been improved upon by the factory over time. Some have bronzed bushings in key wear areas to increase the life of the movement, and on the non-pendulum units the balance has been improved upon for longer life and ease of timing.

Clock Movements

340-020

Handshaft 33.2mm
5 Hammer below
Balance escapement
Plate size = 100 x 100mm 
Spring driven
  		Movement $269
PictureHermle Movement

 

 

341-021


25, 33.5, 35, 45CM Pendulum
Handshaft 27.6mm
5 Hammer below
Plate size = 100 x 100mm 
Spring driven
  		Movement $269
PictureHermle Movement

 

340-020K


Handshaft 33.2mm
Calendar movement
Balance escapement
5 Hammer below
Plate size = 100 x 100mm 
Spring driven
  		Movement $309
PictureHermle Movement

 

341-023


35CM
Handshaft 53.2mm Pendulum
5 Hammer below
Plate size = 100 x 100mm 
Spring driven
  		Movement $269
PictureHermle Movement

 

341-020


11, 25, 33.5, 35, 37, 38.5, 45CM Pendulum
Handshaft 33.2mm
5 Hammer below
Plate size = 100 x 100mm 
Spring driven
  		Movement $269
PictureHermle Movement


 

 

Select the beginning part of the Hermle number below for movement details

130+131+132 140+142 241 261 340+341 350+351
451 461+471 1050+1051 1151 1161 1171
Want to get in touch? Send us an E-Mail