Hermle Clock Movement at Wholesale

HERMLE MOVEMENTS

We offer only the best grade of clock movements with no plastic components

Every clock movement comes with a 2 year warrantee

Less cost than a cleaning in most cases
Should last 25-30 years, a repair would not
Easy to install, we can help if needed
Ships same day as order

HOW TO ORDER:

Find the model number on the back of the clock movement that match the numbers on this list. Usually there is three or four numbers followed with a dash (-) and then another set of three or four numbers. Then find the centimeter length, just below the model number, it looks something like this (66CM). This centimeter length represents the length of the pendulum measured from the suspension post down to the very bottom of the threads on the rating nut. (If the clock has one). Match these up to the list and you have a brand new movement that will replace your broken one.

Movements may vary from the Picture

The matching of the movement number is what makes the difference, if the old movement number matches on the list, then you will get that exact same movement.

NOTE:

Many of the HERMLE MOVEMENTS have been improved upon by the factory over time. Some have bronzed bushings in key wear areas to increase the life of the movement, and on the non-pendulum units the balance has been improved upon for longer life and ease of timing.

350-020 Handshaft 33.2mm 5 Hammer below Balance escapement Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture	351 030 45, 66CM Pendulum Handshaft 33.2mm 5 Hammer side: new style Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture
350-023 Handshaft 53.2mm Pendulum 5 Hammer below Balance escapement Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture	351-031 34, 55CM Pendulum 75CM (Regearing needed+$20) 52CM (Regearing needed+$20) Handshaft 27.6mm 5 Hammer side: new style Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture
350-060 Handshaft 33.2mm 5 Hammer back - diagonal gong Balance escapement Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture	351-050 32,48, 75, 85, 94CM Pendulum 55cm (needs regearing +$20) Hand shaft 33.2mm 8 Hammer back Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture
351-020 15, 25, 31, 32, 34, 38, 43, 45, 48, 55, 66, 75CM Handshaft 33.2mm 5 Hammer below Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture	351-051 48CM Pendulum Handshaft 27.6mm 8 Hammer back Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture
351-021 26.5, 34CM Pendulum Handshaft 27.6mm 5 Hammer below Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture	351-060 15, 32, 85CM Pendulum Handshaft 33.2mm 5 Hammer back - diagonal gong Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture
351-021K 85CM Pendulum Calendar movement Handshaft 27.6mm 5 Hammer below Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture	351-830 66, 75, 85CM Pendulum Handshaft 27.6mm Plate size = 120 x 120mm Spring / weight Takes a #8 key	Movement $319 Picture =Movement only!
351-030 34, 38, 43, 48, 55, 75CM Pendulum Handshaft 33.2mm 5 Hammer side: new style Plate size = 120 x 120mm Spring driven Takes a #8 key	Movement $299 Picture	351-850 114CM Pendulum Handshaft 33.2mm Plate size = 120 x 120mm Spring / weight Takes a #8 key	Movement $319 Picture =Movement only!

Select the beginning part of the Hermle number below for movement details

130+131+132	140+142	241	261	340+341	350+351
451	461+471	1050+1051	1151	1161	1171

Want to get in touch? Send us an E-Mail