USA Made
Item #HT1 = 2 1/8 Square
The most common movement for schools and hobbyists to produce clocks. By Takane
1 + $16. | 12 + $12. | 50 + $10.
Item #HT1
QUARTZ HIGH TORQUE
High Torque movements run the longest hands. See hand offers below
Movements come with various post lengths, this is the brass threaded portion of the movement that the hex nut goes on.
For the correct post length, measure the thickness of the dial (face) of the clock
- Included hardware and hanger.
- 3 Year Warranty
- Threaded Shaft Diameter 5/16"
- 2 1/8 x 2 1/8 x 5/8
- Select quality / post length below
Dial (clock face) Thickness
- 1/8 inch thick
- 1/4 inch thick
- 3/8 inch thick
- 1/2 inch thick
- 3/4 inch thick
Size Post Needed
- 3/16"
- 5/16"
- 7/16"
- 11/16"
- 15/16"
For the correct post length, measure the thickness of the dial (face) of the clock.
Then use the chart and see what post length you need.
The post length is only the brass threaded portion.
JAPAN Made
Item #HT2 = 2 1/8 Square
Exceptional quality produced by Seiko, this movement is very durable and reliable. By Seiko SKP
1+ $20 / 12+ $18 / 50+ $16
Item #HT2
LONG HANDS
(Measured from the center of the hole to the end of the minute hand. Hour hands just come proportionally smaller)
Item # - HTH1
Comes in three long lengths
Item # - HTH2
6 Inch Length
Item # - HTH3
Comes in many long lengths
Item # - HTH4
Four lengths to choose from
Item # - HTH5
6 inch Length
Numbers
Gold / Black Arabic Numerals
$2.75
Item #DL18
These Numerals have a sticky back to them. They come in many sizes as seen on the list below.
Gold / Black Roman Numerals
$2.75
Item #DL19
These Numerals have a sticky back to them. They come in many sizes as seen on the list below.
Large Three Inch Number Set
$5
Item #DL13
3" black plastic Arabic numbers designed to be used with high torque movements. Sticky back. Comes with only 12-3-6-9 These Numerals can be drilled and screwed onto a surface to stay more permanent.
Want to get in touch?
Send us an E-Mail