|
|
1-888-200-7445
|
JAUCH TO HERMLE
1-888-200-7445
We offer only the best grade of
movements with no plastic components
Every movement comes with a 2 year warrantee and some free installation videos
|
Jauch is out of business and NO movements are
available. |
The following modifications are usually required:
Dial must be attached to the case.
Chime block may or may not have to come in a little more in the case.
Movement would have to be shimmed (we provide the shims and instructions)
New lead weight would be installed into the existing right hand chime weight shell. This will be provided.
Top hook on the pendulum will have to get swapped with one that is provided.
The pendulum may or may not have to get shortened. If the clock is too slow even with the bob all the way up, the pendulum stick must get cut 1 1/2 shorter.
If you have further questions on this you can call James at the toll free number. With the modifications listed, you will have a new movement for this clock case and if you ever want to, you can upgrade the pendulum to a fancy metal Lyre style.
If this does not work out for you and you have the original packaging so it can be resold as new, you can return this kit for a refund.
|
JAUCH-61 (old unit marked P1.61cm Westminster)
|
JAUCH-77T (old unit marked same as above but triple chime)
|
|
JAUCH-64 (old unit marked P1.64cm Westminster)
|
JAUCH-78 (old unit marked with P1. 78 on rear)
|
|
JAUCH-77 (used in many Kit clocks-unit marked with 77 on rear)
|
JAUCH-78T (old unit marked same as above but with triple chime)
|
The following conversions are for the Large plate Jauch measuring
approx. 6" X 9":
|
JAUCH-93 for the P1 93cm and P1 94cm Jauch unit
|
JAUCH-116 for the P1. 110cm and P1. 116cm Jauch unit uses 471-050HS/114cm
|
|
JAUCH-93T same as above but triple chime with Hermle 1171-050HS/94cm
|
JAUCH-116T same as above but triple chime with Hermle 1171-050HS/114cm
|
|
Advantages of a repair:
You do not have to
modify the dial or pendulum top hook.
|
Advantages of replacing:
The movement is much
easier to get parts for.
|
|
Disadvantages of a repair:
You will have to have
it done all over again in 5 to 10 years.
|
Disadvantages of replacing:
Some modifications
maybe required such as listed on this page.
|
Overall it is our opinion
after working with these clocks for years that a replacement makes more sense
than a repair on the unit.
|
Copyright © 2008 Clockworks.com All right reserved |
|
|