NEW 1051-051 Clock Movement by Hermle

September 19, 2018 3:36 pm Published by Leave your thoughts

$349.00

The Hermle clock movement 1051-051 is a Triple Chime unit with 8 hammers on the back.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

Clear

Assistance = 800-381-7458

Selecting the movement

The numbers on the back plate of the movement is everything one needs to get a replacement. If the numbers match then the movement matches.

If the clock is a pendulum unit, be sure to select the proper CM length that matches the old unit.

Hermle 1050-020 Series
  • 43, 48, 75CM
  • 27.6mm Hand shaft
  • 8 Hammer Back
  • Bottom Mount
  • Spring Driven
  • Less cost than a cleaning in most cases
  • Should last 25-30 years, a repair would not
  • Easy to install, we can help if needed
  • Ships same day as order

The Hermle clock movement 1051-051 is a Triple Chime unit with 8 hammers on the back.

This high quality German movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.


This high quality weight driven German movement comes pre oiled and includes its leader, suspension spring and hand nut if its a pendulum unit.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

The German made movement comes pre oiled and includes its leader, suspension spring and hand nut.

Removal of this movement is easy and we provide instructions for the installation. This movement is in stock and can ship today. We are full time clock makers and retailers both, so if you need any assistance with install we can help.

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and its prelubricated.

You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458.

Hermle Logo

Hermle movement number starts with....


Mechanical Clock Movement Identification by Clockworks.com
Mechanical Clock Movement Identification by Clockworks.com
Mechanical Clock Movement Identification by Clockworks.com

How to identify a Hermle movement

On the back plate of the clock movement you will see the numbers such as 451-050 94cm. These numbers let us know everything we need to know about the mechanical clock movement itself. This tells us if the clock is weight driven or spring driven, if it has a pendulum, the size of the movement and the length of the hand shaft and much more. To match up the numbers to the new movement numbers is to get the exact same movement you have now but brand new. Since the new movement will be the exact same and not some knock off imitation, all of your existing clock components will usually fit just the same as the old unit.


What Happened to the old movement?Other Names UsedHow to orderHermle Movement AvailabilityWhy order a new clock movement?

With age, the mechanical clock movements oil solidifies and becomes black and sticky. By the time 20 or 30 years go by, the oil has solidified and is creating wear on the movements brass plates.

If you look at your old clock movement, you will see holes in the brass plates where there are small pivot arbors sticking into these holes. These pivots are what the gears of the clock ride upon and as the pivots spin in the solidified oil, this makes the holes oblong instead of round. With the pivot holes oblong, the holes are pinching the pivots and creating resistance in the gear train. With the solidified oil and the pinched pivots, the clock will eventually stop working or chiming.

Other Names Used

There are a variety of other names that can be on the movement even though it is produced by the Hermle company.

  • Hamilton
  • S. Larose
  • Mason & Sullivan
  • Welby
  • Pearl
  • Tally Industries
  • Bulova
  • Seth Thomas
  • Howard Miller
  • Sligh

Hermle Number Examples

Below are some typical examples of the Hermle clock movement numbering system. If your clock numbers are similar to this, its made by Hermle.

  • 451-050 94cm
  • 340-020
  • 140-070
  • 451-030 66cm
  • 341-020 45cm
  • 1151-050 114cm
  • 451-053 94cm
  • 1161-853 114cm
  • 141-070 45cm
  • 351-050 55cm
  • 1161-850 94cm
  • 241-070 94cm

When you have the numbers off of the back plate of the Hermle mechanical clock movement, you only need to match it up and order right on this website. The movement numbers are everything, if we provide a picture for that number and it does not look identical, it is still the correct movement as long as the numbers match up.

To get to the page that the numbers can be matched, the first thing to do is to match the movements number's prefix. The numbers prefix is the first set of numbers in the set, such as if the movement's numbers are 1161-853 114cm, the prefix would be 1161. You would go to the list of movements prefix's below and click on the 1161 to see all the movements in that number series, such as 1161-050 or 1161-853 or 1161-850.

On the back plate of the clock movement you will see the numbers such as 451-050 94cm. These numbers let us know everything we need to know about the mechanical clock movement itself. This tells us if the clock is weight driven or spring driven, if it has a pendulum, the size of the movement and the length of the hand shaft and much more. To match up the numbers to the new movement numbers is to get the exact same movement you have now but brand new. Since the new movement will be the exact same and not some knock off imitation, all of your existing clock components will usually fit just the same as the old unit.

To order a new clock movement means having your clock up and running in the shortest amount of time and have it cost less than an overhaul of the old unit.

The new clock movements will ship the same day as you order it, usually from Huntington, MA via UPS. The new movement will of course last a lot longer than any repair that can be done on the old unit. When the repair is done it is still going to be an old movement and in no way can it out last a new one.

With this new unit, your up and running in days instead of months, the cost is usually less than a cleaning, and it will last much much longer before you have to think about having your clock serviced again.

Hermle Date Codes

Mechanical Clock Movement Identification by Clockworks.com
Hermle Clock Logo from Clockworks.com

Hermle date codes, what year it was made

Mechanical Clock Movement Identification by Clockworks.com
Early movements prior to the year 1987 have just the stamp of the year on the back of the clock movement, 81 just means 1981. From 1987 on, they used letter codes instead of numbers to represent the year made. Such as the year 1987 is only marked with the letter A instead, and 1988 is the letter B.
A = 1987 B = 1988 C = 1989 D = 1990 E = 1991 F = 1992 G = 1993 H = 1994 G = 1995 H = 1996 I = 1997
J = 1998 K = 1999 L = 2000 M = 2001 N = 2002 O = 2003 P = 2004 Q = 2005 R = 2006 S = 2007 T = 2008
U = 2009 V = 2010 W = 2011 x = 2012 y = 2013 Z = 2014 AA = 2015 BB = 2016 CC = 2017 DD = 2018 EE = 2019

Hermle movement number starts with....

Additional information

Weight 4 lbs
CM Length

43cm, 48cm, 75cm

You may also like…