|
|
|
QUARTZ MOVEMENTS
Add the movements to the cart, then come back and choose hands from below
|
|
Movements come with various post lengths, this is the brass threaded portion
of the movement that the hex nut goes on. |
For the correct post length, measure the thickness of the dial (face) of the clock. Instruction Video |
|
Chiming Seiko
1+ $59 / 6+ $39 Item #QU30 |
Four melody options: Either Westminster chime or Ave Maria with partial melody on each quarter hour with a full melody and hour count on the hour. The other two options are either Bim Bam or Westminster on the hour only. This unit has the best sound in the industry. It has a 3" speaker that has 23" of connecting wire so the speaker can be mounted almost anywhere in the clock. This movement can be used with or without a pendulum so this will even work well with mantle clock cases.
1+ $79 / 6+ $59 Item #QU40 |
Non
Chiming Pendulum Unit
1+ $20 / 6+ $16 Item # QU3 |
Bim Bam
|
|
Westminster Chime
1+ $49 / 6+ $39 Item #QU22 |
You can now make grandfather size clocks with a traditional pendulum without spending hundreds of dollars on a mechanical movement. Even better, since this device is driven from the top, you can design clocks that have a large pendulum that is not surrounded by a case of any type. Just imagine the possibilities! Here are the specifics: our new heavy duty pendulum drive will operate a 41" pendulum that weighs up to 8 ounces, that's half a pound! It will operate for over a year on just one alkaline "D" cell battery. Please remember, this is not a clock movement, but rather just a device that will operate a large pendulum. You can use it with any quartz movement to create whatever type of clock design you wish. PENDULUM NOT INCLUDED Drive Dimentions: 8 3/8" x 3" x 2 1/8" |
![]() Minute hand measured from the hole to tip. Hour hand that comes with the set is smaller proportionally |
Second Hands $1.00ea
|
|
|
Clockworks.com |
|