WATCH TOOLS
Waterproof / water resistant watch case opener with its four pin holder. This opener and holder set will open about 85% of all the screw back watch cases in existence. Also included is the snap style watch case opener.
Item#WT34--$29
Hand held opener for Rolex watch cases. This opener comes complete with six dies with the measurements of 29.50mm + 28.30mm + 26.50mm + 22.50mm + 20.20mm + and 18.50mm
Item#WT7--$49
Glass fitting press for fitting mineral watch crystals. Also used for pressing down on stubborn snap watch backs when replacing batteries. Comes with 12 dies.
Item#WT73--$35
This is a clamp-able watch holder that helps in removing a screw off
back. The four pins on this unit are adjustable to watch case sizes.
Item#WT13--$16
Accurately tests silver oxide, mercury, and lithium batteries in seconds as well as the coil. The newest advance in watch analyzers: you can easily determine whether the movement is working or if the battery is dead without opening the watch.
Item#WT25--$59
Perfect size for opening snap back watch cases. The handle material may vary between wood and plastic.
Item#WT62--$5
Great for cementing crystals. Apply a Small bead around the bezel of the watch and insert your plastic or glass replacement crystal.
Item #WT71--$10
This tool is easy to use and very effective. Stick the tool through it and the tool is now magnetized. Do it again and the tool is now demagnetized.
Item#WT74--$19
Removes scratches from plastic crystals.
Item#WT82--$10
Supports your work in a position that the center hand shaft and the Small second shaft will not get bent.
Item#WT40--$6
Set of 4 pin vises with capacities from .0mm to 4.65mm.
Item #WT68--$15
This is one of the most popular system for removing push pins from metal watch bands.
Item#WT76--$19
Removes hands in a straight upward motion as to not bend them. This style remover is best for larger watches.
Item#WT14--$15
Removes hands in a straight upward motion as to not bend them. This style is best suited for small watches
Item#WT42--$15
Micrometer Reading 0 - 15 mm. This tool is used for many measuring tasks in watch and clock repair.
Item#WT49--$19
Holds a variety of movements securely during operation.
Item #WT72--$19
This is a opener for twist off pocket watch case backs.
Item#WT56--$3
Stainless steel tweezers set of various shapes and lengths.
Item#WT31--$17
This is used to remove dents in watch cases by aligning the case with the proper concave portion of the block, then tapping the dent out with the taps and hammer.
Item #WT81--$14
Bar Tool Nickel led spring bar tool with Large and Small forks on opposite ends. Style may vary.
Item#WT16--$8
Set of 14 pocket watch keys that cover every size out there.
Item#WT30--$17
This tool removes the excess links easily with its 3 sized pins to push the band pins out in a straight and steady motion with no scratches or scuffs. Made of stainless steel.
Item#WT21--$16
Set of nine precision screwdrivers set in an organized wooden Box.
Item#WT20--$20
To sharpen and peg out small holes during cleaning.
Item#WT83--$5
6 inch lengths of Orangewood to help clean pivot holes.
Item#WT84--$5
Eye loupe with the perfect magnification for watch repair or battery replacement.
Item#WT85--$3
This is for displaying the hunter style pocket watches. This can display the watch with the lid open.
Item#WT77--$15
This is for displaying the open face pocket watches.
