Search Results for Watch

9 Items Found

• Grandfather Clock Strike Quantity Correction

  This article will address the German Grandfather Clock Strike Quantity Correction issue. This is where the clock will not strike the correct number of hours. This includes if it is striking any hour for two hours in a row. Also if it is striking more than 12 hours at a time, or even striking forever. The correction does not require... View Product

  LEARN MORE

• Replacing Cuckoo Bellow Tops

  The lift wires travel from the movement up to the flaps of the old bellow tops. Furthermore, these wires are taken off in order to remove the cuckoo bellows. Usually this is done by opening the loop on the lower end of the lift wire. This is where it connects to the movement's lift arm. Use a small flat head... View Product

  LEARN MORE

• Clockworks Clock Supply Origin

  Clockworks clock supply origin begins with Nepaug Clockworks in the mid 1940’s by Robert Tonkin. Nepaug is a quaint town in New Hartford, CT. This legacy of Clock repair service began in a barn near the house in Nepaug. Also, additional work with a Jeweler that was across from the old Seth Thomas factory in Thomaston, CT. In 1991 his... View Product

  LEARN MORE

• Clockworks Clock Supply

  Welcome to clockworks.com clock supply. We are a global Horological supplier of clock parts and clock movements. Of course, we are an ethical family of clock enthusiasts that work on clocks every day. This family has 100 years of clock making and repairing as a back ground, and this website was made in 1998 upon the dawn of the internet.... View Product

  LEARN MORE

• Cuckoo Clock Repair Parts

  The most common Cuckoo Clock Repair Parts sold are the bellow tops and the hands. The bellow tubes are usually good to reuse on the clock, just the bellow tops have cloth that rip over time and therefore the clock will not cuckoo the time out. If the cloth is torn, you do not need to replace the entire cuckoo... View Product

  LEARN MORE

• Seth Thomas Historical Timeline

  Overall, the Seth Thomas Historical Timeline is a great way to familiarize yourself with background information that may pertain to your clock. The Seth Thomas factory made countless clock movements during and prior to the second world war. Of course, the high quality standard made the company a great success. Furthermore, after the war they did not make any movements.... View Product

  LEARN MORE

• Mechanical Clock Kit Styles Available

  Mechanical Clock Kit Styles Available include wall clocks, mantle (shelf) clocks, and floor clocks. Floor models includes the granddaughter, grandmother, and grandfather series. Mechanical Clock Kit Styles are in the list below. Mantle clock kits are always spring driven and wound with a clock key. Moreover, it can come in a variety of chime types. Triple chime, Westminster only, bell... View Product

  LEARN MORE

• Hermle clock 351 – 350 movement

  The 351 - 350 movement Hermle clock series has Westminster chime and with a 120mm square outer plate size. It comes in a pendulum version such as the 351-020 or the non pendulum balance wheel version like the 350-020. The balance kind just has a balance wheel more like a watch on the top of the movement that acts as... View Product

  LEARN MORE

• American clock repair options

  It's a shame when a clock is not able to operate for years on end. It sits for so long until one day it is just time to do something about it. For the antique American made clock to function again there are two main clock repair options. Replace the movement with a modern reproduction made in India, or repair... View Product

  LEARN MORE