Search results: “Cable”

Showing 1–16 of 255 results

• turned_in_out Clock Weight Accessories

  Grandfather Clock Replacement Cable

  Original factory replacement grandfather clock replacement cable for German clock movements. The cables are original and sometimes vary slightly in lengths. They have the ends that lock into the clock movement installed already.

  WE3: $25.00 – $40.00

  View Product

• turned_in_out Clock Weight Accessories

  Mechanical Clock Replacement Cable

  Mechanical clock cable for cable driven clock movements. You must knot the ends as this cable does not have the fittings like the other types of cable we carry. The clock cable is .040 (1.0mm) thick and there are various lengths to choose from in the drop down menu.

  WE2: $10.00 – $40.00

  View Product

• turned_in_out Clock Weight Accessories

  Brass Clock Cable Pulley

  Tall-Case Brass Clock Pulley for antique floor clocks. The cable will loop through the 1 3/4" wheel and the top of the weight hooks onto the bar of the pulley.

• turned_in_out Clock Weight Accessories

  Mechanical Clock Weight Pulley

  Solid brass cable pulley for Hermle / Urgos / Kieninger mechanical clock movements. Available in two sizes 1 3/4 inch diameter or 1 1/4 inch diameter. The grandfather and grandmother clock series will take the 1 3/4 wide pulley.

  we5: $25.00 – $33.00

  View Product

• turned_in_out Clock Weight Accessories

  Hook Clock Weight Pulley

  Solid brass cable pulley for Urgos / Kieninger mechanical clock movements. This brass pulley is 1 7/8 inches wide and has a hook for the weight to hang.

  We-HookTop: $38.00

  Hook Clock Weight Pulley quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Grandfather Clock Weight Pulley

  Solid brass grandfather clock weight cable pulley for Hermle / Urgos / Kieninger mechanical clock movements.

  we5-1: $33.00

  Grandfather Clock Weight Pulley quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Mechanical Clock Weight Pulley WE5-2-134

  Solid brass cable pulley for Hermle, Urgos, and Kieninger mechanical clock movements. Available in two sizes 1 3/4 inch diameter or 1 1/4 inch diameter. The grandfather and grandmother clock series will take the 1 3/4 wide pulley.

  we5-2-134: $33.00

  Mechanical Clock Weight Pulley WE5-2-134 quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Grandfather Grandmother Clock Chain

  Grandfather grandmother clock chain by movement maker or links per foot LPF. Count the links on the old chain so it matches the LPF on the drop down menu.

  Chain: $6.00 – $25.00

  View Product

• turned_in_out Clock Weight Accessories

  Round-Edge 60mm Weight Cap

  Polished brass tone weight shell end caps are the tops and bottom of the weight shell. Available in 60mm diameter and sold individually.

  RoundedCap60mm: $6.00

  Round-Edge 60mm Weight Cap quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Clock Weight Loop Top Hook

  Clock Weight Loop Top Hook for modern German clock movements such as Hermle / Urgos / Kieninger. This top hook is for chain driven grand mother or grand father clock movements. The hook of the chain will go into the loop of the top hook to hang the weight. This clock weight top hook has an internal M4 (4mm) thread... View Product

  We-Loop-Top: $15.00

  Clock Weight Loop Top Hook quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Kieninger RWS Clock Pulley

  Clock weight pulley for Kieninger RWS series movements. This holds the type of weight that is split into two weights on one time train. The RWS series weight specification calls for 9.9lbs on the time train and on this movement this weight is split into two.

  Rws-Pulley: $38.00

  Kieninger RWS Clock Pulley quantity

  ADD TO CART

• turned_in_out Cable Driven Movements

  1161-853 Hermle Clock Movement

  1161-853 Hermle Clock Movement is a triple chime cable driven unit with three weights. This is a rectangle shaped movement with the movement plate size of 140 x 200mm and takes a size #8 crank (If cable).

  1161-853: $555.00 – $660.00

  View Product

• turned_in_out Clock Weight Accessories

  Tall Case Clock Pulley

  Tall case clock pulley for antique floor clocks. This part is what the clock weight will hang onto in the waist of the clock. It is 1 3/4 inches wide, made of brass, and has a steel S hook.

  CP41: $35.00

  Tall Case Clock Pulley quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Clock Weight Top Hook Kit

  Brass top Clock Weight Hooks for modern German clock movements such as Hermle / Urgos / Kieninger. The top hooks are made with external threads or internal threads and also M4 threads or M5 threads.

  WE6: $10.00 – $25.00

  View Product

• turned_in_out Clock Weight Accessories

  Polished Clock Weight Cap

  Polished brass tone weight shell end caps are the tops and bottom of the weight shell. Available in 43mm, 47mm or 60mm diameters and sold individually.

  WE1: $8.00 – $12.00

  View Product

• turned_in_out Mechanical Grandfather Clock Weights

  Polished Clock Weight Shell Only

  Polished clock weight shell to replace a damaged or discolored one. No lead filler, just the new outer shell, the rod in the middle, the two caps and the hook on the top and the nut on the bottom.

  WSHELL: $45.00 – $55.00

  View Product