Search results: “Quartz spade”

Showing all 15 results

  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Spade Quartz Clock Hands #H2

    The hands are sold as a pair. So only measure the minute hand from the center of the mounting hole to the end. The minute hand has an oblong mounting hole, the hour hand has a round one.

    H2: $1.00$5.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Super Long Clock Hands

    Spade Super-Torque Clock Hands

    Spade super-torque quartz clock hands will only work on a super torque C cell movement. The measurement is done with the minute hand only but the hour hand will come with the set.

    HTH3: $13.00$15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Battery Clock Hands

    Maltese Quartz Clock Hands #H3

    Maltese quartz clock hands have a nice design that falls between the Serpentine look and Spade. The hour hand is a friction fit and the minute hand mounts with its oblong mounting hole and a nut.

    H3: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Spade Variant Clock Hands for German Clocks

    Hour and minute Spade Variant Clock Hands that fit most German mechanical clock movements made after 1950, these are for a 6 inch time track. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

    RC30: $20.00
  • launch

    View Product

    View more

    turned_in_out American Mechanical Clock Hands

    Spade Clock Hands American

    Spade hands for antique 8 day time strike units made in America. For American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury.

    CH9: $13.00
    View Product
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Mechanical Clock Spade Hands

    Spade hands that fit most German mechanical clock movements. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals and the minute hand length will be about half this diameter.

    CH1: $20.00$26.00
    View Product
  • launch

    View Product

    View more

    turned_in_out American Mechanical Clock Hands

    Pierced Spade Clock Hands

    Pierced spade hands for antique 8 day time strike units made in USA for a 5 inch time track. For American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury.

    CH7: $13.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical to Quartz Conversion

    Regulator Style Clock Hands

    Here are Regulator Style Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

    CH8: $18.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    German Clock Hand Nuts

    German clock hand nuts for post 1950 clock movements. Fits Hermle, Kieninger, Urgos, Jauch and more. However these hand nuts will not work on a cuckoo clock. Therefore, Cuckoo clock hand nuts are available on the cuckoo parts page.

    CP9: $10.00
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Hands

    Hermle 1161-853 Second Hand

    For a Hermle 1161-853 Second hand sweep with the second hand option. This movement number must match the movement number that is on the back plate of the brass movement itself.

    CH13A-2: $13.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    American Clock Hand Nuts

    A mixture of steel and brass American clock hand nuts. This is a 12 pack of hand nuts that are all the same thread size. They are likely to fit American time strike units made from around 1930 to 1950's.

    CP14: $15.00
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Serpentine Mechanical Clock Hands

    This is a set of Serpentine Mechanical Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

    CH3Hands: $11.00$26.00
    View Product
  • launch

    View Product

    View more

    turned_in_out American Mechanical Clock Hands

    Maltese Clock Hands American

    For American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury offering Maltese hands. Available with a square hole or a oblong hole for the mounting hole in the minute hand.

    CH11: $13.00$20.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Hands

    Grandfather Clock Second Hand

    Second hand sweep for a mechanical grandfather clock with the second hand option. Please choose the movement number that is on the back plate of the brass movement itself.

    CH13A: $13.00
    View Product
  • launch

    View Product

    View more

    turned_in_out American Mechanical Clock Hands

    Seth Thomas Clock Hands

    Hands that have an ST on them to represent Seth Thomas clock movements, for antique 8 day time strike units made in USA. Fits most American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury.

    CH10: $13.00
    View Product