Search results: “cuckoo”

Replacing Cuckoo Bellow Tops

Disconnecting the bellows The lift wires travel from the movement up to the flaps of the old bellow tops. Furthermore, these wires are taken off in order to remove the cuckoo bellows. Usually this is done by opening the loop on the lower end of the lift wire. This is where it connects to the movement's lift arm. Use a small flat head screwdriver to twist open the loop on the wire. Removing the cuckoo bellows Usually, one flat head...

See more articles about cuckoo ⇲

Showing 1–16 of 73 results

  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Pine-Cone Weights

    Cuckoo clock weights are in the form of pine cones. They are sold in gram weight. This gram amount is usually on a stamp on the weight itself. Cuckoo clocks all take the same weight for all the chains with only a few exceptions.

    CU5: $20.00 - $80.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Repair Kits

    Cuckoo Clock Repair Cleaning Kit

    This kit has the basic items to clean and repair a Cuckoo Clock without disassembly. Cleaning without disassembly is not as effective but it is sufficient in most cases. This kit is for novice who would like to do a simple cleaning without learning an intense amount of clock repair.

    CUCKIT: $100.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Hands

    A set of hour and minute hand for cuckoo clocks made afte 1950. Measure the minute hand from end to end to get the correct length to order. The hour hand comes with the minute hand as a set.

    CU10: $10.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Bellow Top Epoxy Adhesive

    Cuckoo bellow tops use epoxy when replacing a worn top with a new one. The epoxy also works well to glue broken cuckoo wood case parts back together.

    CU27: $6.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    Cuckoo Clock Movement Regula-25

    Regula-25 one day Cuckoo clock movement. By far, the most common use of this cuckoo clock movement is post-1950. The unit winds once a day and uses two weights. Furthermore, use 275 Grams for each weight. Sometimes 320 grams can run this unit. Comprehensive Floor Clocks Manual Explore our in-depth guide to understanding and mastering all types of floor clocks.... View Product

    R25: $150.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    Cuckoo Clock Movement Regula-34

    The Regula 34 cuckoo clock movement has an 8 day run time. It has a mark with 34 either alone or some other numbers along with this number. When replacing, please check the old one for this mark. The mark 34 is on the back plate of the movement above the bellow lifting wheel. Comprehensive Floor Clocks Manual Explore our... View Product

    R34: $220.00 - $280.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Head Dressing Bird-Top

    This bird-top will solve the issue of having a topless cuckoo. Beautiful hand carved brown decoration of solid wood that goes on the top of the cuckoo clock. Styles may vary a little depending on size.

    CU21: $65.00 - $120.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Repair Clear 2-part-Epoxy

    Cuckoo Repair Clear 2-part-Epoxy great for cuckoo clock bellows, figurines, and broken cuckoo wood repair. Squirt out equal amounts of both sides and mix it up with tooth picks. Will set in around 5-10 minutes clear.

    HBF1: $12.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Decoration Boat

    A well made plastic cuckoo clock decoration boat. Boat figurine for a cuckoo clock that has the fishing theme. This decoration would just get glued onto the cuckoo clock case with clear epoxy that is sold separately.

    RC15: $12.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Decoration Log-Pile

    Cuckoo clock decoration log-pile. A stack of wood logs for a cuckoo clock to decorate the case. To be used usually with the wood chopper figurine on a cuckoo clock. Measures 1 1/2 inches (38mm) tall and 1 1/2 inches (38mm) long.

    RC7: $12.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    8-Day Regula Cuckoo-Clock Dancer-Movement

    Regula Cuckoo-Clock Dancer Movement is the most common 8 day dancer cuckoo movement in existence. This Regula movement takes 1250 or 1500 gram cuckoo pine cone weights. Comes with a 3 year warranty. Comprehensive Floor Clocks Manual Explore our in-depth guide to understanding and mastering all types of floor clocks. This manual offers essential insights on setup, operation, and maintenance,... View Product

    CUD34: $280.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Wire Assortment

    Enhance your cuckoo clock restoration with our comprehensive wire set, featuring various lengths of bellow lifting wires, eye hole wires, cuckoo bird door wires, and the essential bird-to-door wire. Streamline your restoration process with this all-inclusive collection of wires tailored for cuckoo clock enthusiasts.

    CU25: $20.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    1-Day Regula 25 Cuckoo-Clock Dancer-Movement

    Regula Cuckoo-Clock Dancer Movement is the most used 1 day dancer cuckoo movement in existence. This movement takes 275 gram cuckoo pine cone weights. The movement comes oiled, tested, and with a 3 year warranty. Comprehensive Floor Clocks Manual Explore our in-depth guide to understanding and mastering all types of floor clocks. This manual offers essential insights on setup, operation,... View Product

    CUD25: $180.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Movable Bird

    Three inch cuckoo bird that opens its mouth when the tail is goes up. The cuckoo bird installs with a single set screw (included) holding it onto a bent wire rod. Loosen this set screw and unhook the door wire and the bird will fall out.

    CU11: $15.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Head Dressing Mounts

    Cuckoo head dressing mounts attach to the roof of the cuckoo clock case itself. The head dressing has two small screws that lock into these mounts. This allows the head dressing to sit on top of the cuckoo clock case firmly and be removable.

    CU23: $6.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Hunter-Style Wooden-Front

    Dark pine wood cuckoo clock front great for hunter style cuckoo clocks. Features two kills, a bird and a rabbit carved hanging upside down. The center has a french style horn.

    RC33: $80.00 - $175.00
    View Product