Search results: “grand clock kit”

Showing 1–16 of 63 results

• turned_in_out Grandfather Clock Kits

  Round Dial Grandfather Clock-Kit

  Round dial grandfather clock-kit's minimum case requirements are 8" deep, 12" wide, 52" tall. Any smaller clock case and this kit will not work. The German made grandfather clock movement is triple chime and cable driven.

  GFKIT6: $1,150.00

  View Product

• turned_in_out Grandfather Clock Kits

  White Moon Dial Grandfather Clock Kit

  White moon dial grandfather clock kit's minimum case requirements are 8" deep, 12" wide, 52" tall. Any smaller clock case and this kit will not work. The German made clock movement is triple chime and cable driven with an 8 day run time.

  GFKIT5: $1,250.00

  View Product

• turned_in_out Grandfather Clock Kits

  Triple-Chime Grandfather Clock Kit GFKIT101

  The Triple-Chime kit is a standard size for large grandfather clock cases. Includes a German made mechanical clock movement that is cable driven. The three song options are selected by a switch that goes through the dial.

  GFKIT1: From: $1,280.00

  View Product

• turned_in_out Grandfather Clock Kits

  Mechanical Grandfather Clock Kit

  Mechanical Grandfather Clock Kit is cable driven clock kit has a triple chime movement. Will play a chime on the quarter hours. At the top of the hour it will strike out the hourly count when its done with the chime.

  GFKIT2: From: $1,290.00

  View Product

• turned_in_out Grandmother Clock Kits

  Mechanical GrandMother Clock Kit GMKIT2

  This quality Mechanical Grandmother Clock Kit has a Westminster chime movement that it progressively at the quarter hours. Then it will strike out the hourly count when its done with the chime.

  GMKIT2: $799.00

  View Product

• turned_in_out Grandmother Clock Kits

  Westminster GrandMother Clock Kit GMKIT4

  This quality grandmother or grandfather clock kit has a Westminster chime movement that it progressively at the quarter hours. Then it will strike out the hourly count when its done with the chime.

  GMKIT4: $899.00

  View Product

• turned_in_out Grandfather Clock Kits

  Kieninger Grandfather Clock Kit

  This cable driven triple chime movement plays 4/4 Westminster, Whittington, or St. Michaels chimes sound each quarter hour and strike the full hour.

  GFKIT3: From: $1,581.00

  View Product

• turned_in_out Grandfather Clock Kits

  Tubular Bell Grandfather Clock Kit

  Tubular Bell Grandfather Clock Kit is one of the finest quality clock movements made in modern times. Specifically, it plays 4/4 Westminster, Whittington, or St. Michael's chimes each quarter hour and strikes the full hour.

  GFKIT4: $3,450.00

  Tubular Bell Grandfather Clock Kit quantity

  ADD TO CART

• turned_in_out Grandmother Clock Kits

  Tall-Case Grandfather Clock Kit

  Tall-Case Grandfather Clock Kit with a German made clock movement. It is chain driven with an 8 day run time on a single wind up.

  GMKIT6: $729.00

  View Product

• turned_in_out Grandmother Clock Kits

  Grandmother Clock Movement Kit GMKIT5

  Grandmother Clock Movement Kit This quality grandmother clock kit has a Westminster chime movement that is progressive at the quarter hours. After the chime it will strike out the hours at the top of the hour. It includes a moon dial and a chime silence switch.

  GMKIT5: From: $634.00

  View Product

• turned_in_out Grandmother Clock Kits

  Side-Strike Tall Case Clock-Kit

  Side-Strike Tall Case Clock-Kit has a minimum case requirement of 4″ deep, 11″ wide including the dial (6 1/2" without), 49″ tall with the dial. Has a 100cm (39 1/2") pendulum length from the top of the movement and down.

  GMKIT8: $500.00

  View Product

• turned_in_out Grandmother Clock Kits

  Bell Strike Clock Kit GMKIT7

  This quality chain driven Bell clock kit will strike the hours on a nice deep sounding bell. On the half hour it will strike only once.

  GMKIT7: $475.00

  View Product

• turned_in_out Chain Driven Movements

  Jauch PL64 Clock Movement Kit

  The obsolete Jauch clock movement will be marked PL64 on the back plate. This one is no longer made however we can offer the Hermle equivalent. They are both German made and they were competitors at one time.

  PL64 Kit: $412.50 – $488.00

  View Product

• turned_in_out Chain Driven Movements

  Jauch PL93 Clock Movement Kit

  The obsolete Jauch PL93 clock movement will have a mark of PL93 or just 93 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in there.

  PL93 Kit: $668.00 – $780.00

  View Product

• turned_in_out Wall or Mantle Clock Kits

  Mechanical Westminster Vienna Clock Kit

  Mechanical Westminster Vienna clock kit's minimum case requirements are 4 1/2″ deep, 8″ wide. Pendulum length 55cm, 66cm, 75cm, or 85cm. This CM is the overall length of the pendulum from the TOP of the movement and down.

  WMKIT13: From: $1,235.00

  View Product

• turned_in_out Wall or Mantle Clock Kits

  Mechanical Wall Clock Kit WMKIT1

  Westminster spring driven kit's minimum case requirements are 3 1/2″ deep, 8″ wide, 18 1/2″ tall with the dial. The German made clock movement has a 45cm (17 3/4") pendulum length from the TOP of the movement and down.

  WMKIT1: $419.00

  Mechanical Wall Clock Kit WMKIT1 quantity

  ADD TO CART