Search results: “quartz”

Showing 1–16 of 70 results

• turned_in_out Battery Operated Clock Movements

  Quartz Movement Holder Cup

  Holds a standard 2 1/8 square AA quartz movement. The clock dial can mount to this holder and then the clock can be hung on the wall. Provides a wider base support against the wall so it will not wobble around with long hands when a high torque unit is used. Can also be used as it is with the... View Product

  JH2: $5.00

  Quartz Movement Holder Cup quantity

  ADD TO CART

• turned_in_out Clock Movements

  Quartz Chime Clock Movement #QU22

  Reliable and durable this chiming quartz clock movement is made by Takane. Simplistic in its functions and works as a good replacement for many quartz clock movements. 3″ x 4 3/4″ x 1 1/4″

  QU22P-B:

  View Product

• turned_in_out Clock Movements

  QU22 Non-Pendulum Chiming Quartz Clock Movement

  This product DOES NOT ALLOW for a pendulum. If you are looking for the pendulum version of this product please click here. 4x4 Westminster Chime Chime synchronization knob Takes one C cell battery Made by Takane Built in speaker 7/16 Diameter Post Low price QU22 Non-Pendulum Chiming Quartz Clock Movement that does not take up much room. The bob is... View Product

  QU22NP: $40.00

  View Product

• turned_in_out All Clock Parts

  Serpentine Variant Quartz Hands #H13

  Serpentine Variant Quartz Hands #H13 will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down.

  H13-1: $1.00

  View Product

• turned_in_out Clock Movements

  New Quartz Chiming Movement

  Replacement movements for the German made Hermle quartz. These chiming units take two C-cell batteries and play two different songs. Well made quartz movements that last for a long time. The old units seem to give up the ghost during daylight savings when they do die.

  MSO-B: From: $65.75 $65.00

  View Product

• turned_in_out Battery Operated Clock Movements

  Quartz Clock Movement Hardware

  Quartz clock movement hardware for battery operated time only clock movements. The hardware pack includes rubber washer, the brass washer, a hex nut, a doughnut, and a cap nut. This hardware pack is for threaded posts that are 5/16 wide only. This is what the hex nut will screw onto, the 5/16 wide post.

  Q-HW: $0.75

  Quartz Clock Movement Hardware quantity

  ADD TO CART

• turned_in_out Battery Operated Clock Movements

  Quartz Clock Steel Hanger

  Steel hanger for hanging a quartz clock movement. This hanger allows the clock to hang on the wall without attaching anything to the case. Fits AA battery movements only.

  Q-HANG: $0.40

  Quartz Clock Steel Hanger quantity

  ADD TO CART

• turned_in_out Battery Operated Clock Movements

  Quartz Clock Pendulum

  A quartz clock pendulum rod and bob. The bob comes in three sizes as listed on the order menu. Overall max length is 16 inches. This will work on any quartz clock movement offered by Clockworks.

  Q-BOB: $6.00 – $8.00

  View Product

• turned_in_out Battery Operated Clock Movements

  Quartz Clock Pendulum Rod

  This is the pendulum rod for a quartz battery operated pendulum movement. It is 16 inches at its longest length. This can be shortened to any length less than 16 inches.

  Q-ROD: $3.00

  Quartz Clock Pendulum Rod quantity

  ADD TO CART

• turned_in_out Clock Movements

  Pendulum Quartz Clock Movement QU3

  Time and pendulum quartz clock movement, pendulum and hands sold separate. This is a strong unit that can run hands up to 11 inches long. This is the length of the minute hand from the mounting hole to the end. 2 1/8″ x 3 3/4″ x 7/8″ [bulk-discount-shortcode sku="QU3"]

  QU3-B:

  View Product

• turned_in_out All Clock Parts

  Quartz Clock Chain Decoration

  These come between 5 and 6 foot lengths. You can chop them smaller to hang your weight shells in the air on the quartz grandfather clock conversion kit. These are solid brass and usually go on a mechanical grand father clock.

  QCChain: $15.00

  Quartz Clock Chain Decoration quantity

  ADD TO CART

• turned_in_out Clock Movements

  Quartz Conversion Grandfather-Clock Moon-Dial

  A genuine mechanical phase of the moon clock dial that we modify to accommodate the QU40 quartz movement. This dial must attach to the wood case. The moon disk is a decoration only. It will not turn.

  QCMoon: $100.00

  Quartz Conversion Grandfather-Clock Moon-Dial quantity

  ADD TO CART

• turned_in_out Battery Operated Clock Movements

  Mechanical – Quartz Clock Conversion Kit

  This mechanical clock to quartz conversion kit is sold in the list of part options offered on this page. This conversion would require purchasing the movement, the pendulum drive and hands all separate to create the kit out of what is needed.

  QCON:

  View Product

• turned_in_out Battery Operated Clock Movements

  Quartz Movement Wall Holder

  Quartz movement holder for mounting a wall clock. Holds a standard 2 1/8 square AA quartz movement. The clock dial can mount to this holder and then the clock can be hung on the wall. It will provide a wider base support against the wall and will not wobble around with long hands when a high torque unit is used.... View Product

  JH1: $5.00

  Quartz Movement Wall Holder quantity

  ADD TO CART

• turned_in_out All Clock Parts

  Quartz Clock Second Hand

  Second hands for quartz clock movements that take a battery. Second hands come in Black, Gold, or Red. The measurement being from the mounting post all the way out to the tip. The measurement can also be done off of the clock face.

  SH3: $1.00

  View Product

• turned_in_out All Clock Parts

  Quartz Clock Movement Second-Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH1: $1.00

  View Product