Search results: “quartz hands”

Showing 1–16 of 409 results

• turned_in_out Battery Clock Hands

  Serpentine Quartz Hands #H1

  Serpentine Quartz Hands #H1 will fit any battery clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

  H1: $1.00 – $9.00

  View Product

• turned_in_out Quartz Clock Hands

  Serpentine Variant Quartz Hands #H13

  Serpentine Variant Quartz Hands #H13 will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down.

  H13-1: $1.00 – $10.00

  View Product

• turned_in_out Time Only Clock Movements

  Time-Only Quartz Clock Movement

  These movements use quartz hands that are less than 12 inches long. When replacing a Time-only quartz clock Movement, measure the threads on the post. This is done on the old Low-Torque Quartz Clock Movement. Then match that measurement up for a new one. [bulk-discount-shortcode sku="M2"]

  M2: $18.00

  View Product

• turned_in_out All Products

  Christmas Chiming Clock Movement Bundle

  Plays choice of 5 Chimes Westminster, Bell Westminster, Ave Maria, Gong Chime or 4 Christmas Songs. Has an Chime on and off setting along with an auto night feature and volume control.

  QU60P-B: From: $60.00

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Seiko Chiming Clock Movement

  Seiko durability in a quartz chiming clock movement. Plays choice of Westminster or Whittington on the quarters and then strike out the hours. Has an auto night feature if the chimes are not wanted at night. 3 1/4″ x 5 1/4″ x 1 5/16″

  QU30P-B:

  View Product

• turned_in_out High Torque Clock Movements

  C-Cell Super-Torque Clock Movement #HT2-B

  The powerful C-Cell Super-Torque Clock Movement #HT2-B is the strongest on the market. Use this movement for Quartz hands that are 12 inches or longer. There is no stronger battery operated unit than this one.

  HT2-B:

  View Product

• turned_in_out Hermle Quartz Clock Movements

  New Quartz Chiming Movement

  Replacement movements for the German made Hermle quartz. These chiming units take two C-cell batteries and play two different songs. Well made quartz movements that last for a long time. The old units seem to give up the ghost during daylight savings when they do die.

  MSO-B:

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Pendulum

  A quartz clock pendulum rod and bob. The bob comes in three sizes as listed on the order menu. Overall max length is 16 inches. This will work on any quartz clock movement offered by Clockworks.

  Q-BOB: $6.00 – $8.00

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Movement Wall Holder

  Quartz movement holder for mounting a wall clock. Holds a standard 2 1/8 square AA quartz movement. The clock dial can mount to this holder and then the clock can be hung on the wall. It will provide a wider base support against the wall and will not wobble around with long hands when a high torque unit is used.... View Product

  JH1: $5.00

  Quartz Movement Wall Holder quantity

  ADD TO CART

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Movement Holder Cup

  Holds a standard 2 1/8 square AA quartz movement. The clock dial can mount to this holder and then the clock can be hung on the wall. Provides a wider base support against the wall so it will not wobble around with long hands when a high torque unit is used. Can also be used as it is with the... View Product

  JH2: $5.00

  Quartz Movement Holder Cup quantity

  ADD TO CART

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Pendulum Quartz Clock Movement QU3

  Time and pendulum quartz clock movement, pendulum and hands sold separate. This is a strong unit that can run hands up to 11 inches long. This is the length of the minute hand from the mounting hole to the end. 2 1/8″ x 3 3/4″ x 7/8″ [bulk-discount-shortcode sku="QU3"]

  QU3-B:

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Movement Hardware

  Quartz clock movement hardware for battery operated time only clock movements. The hardware pack includes rubber washer, the brass washer, a hex nut, a doughnut, and a cap nut. This hardware pack is for threaded posts that are 5/16 wide only. This is what the hex nut will screw onto, the 5/16 wide post.

  Q-HW: $0.75

  Quartz Clock Movement Hardware quantity

  ADD TO CART

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Steel Hanger

  Steel hanger for hanging a quartz clock movement. This hanger allows the clock to hang on the wall without attaching anything to the case. Fits AA battery movements only.

  Q-HANG: $0.40

  Quartz Clock Steel Hanger quantity

  ADD TO CART

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Pendulum Rod

  This is the pendulum rod for a quartz battery operated pendulum movement. It is 16 inches at its longest length. This can be shortened to any length less than 16 inches.

  Q-ROD: $3.00

  Quartz Clock Pendulum Rod quantity

  ADD TO CART

• turned_in_out Battery Clock Hands

  Tapered Quartz Clock Hands #H4

    Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

  H4: $1.00 – $18.00

  View Product

• turned_in_out Battery Clock Hands

  Straight Quartz Clock Hands #H6

  Straight quartz clock hands for the standard "I" shaft battery clock movements. These will fit any battery movement sold by Clockworks.

  H6: $1.00 – $2.00

  View Product