Search results: “quartz clock movements”

Showing 1–16 of 84 results

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Movement Hardware

  Quartz clock movement hardware for battery operated time only clock movements. The hardware pack includes rubber washer, the brass washer, a hex nut, a doughnut, and a cap nut. This hardware pack is for threaded posts that are 5/16 wide only. This is what the hex nut will screw onto, the 5/16 wide post.

  Q-HW: $0.75

  Quartz Clock Movement Hardware quantity

  ADD TO CART

• turned_in_out 2

  Pendulum Quartz Clock Movement QU3

  Time and pendulum quartz clock movement, pendulum and hands sold separate. This is a strong unit that can run hands up to 11 inches long. This length is based on the minute hand length from the mounting hole to the end. [bulk-discount-shortcode sku="QU3"]

  QU3-B:

  View Product

• turned_in_out 2

  High-Torque Quartz Clock Movement #HT1-AA

  When replacing a High Torque clock movement, measure the length of the threads on the post. This is done on the old high torque movement. Then match it up for a new clock movement. [bulk-discount-shortcode sku="HT1"]

  HT1-AA:

  View Product

• turned_in_out Quartz Clock Hands

  Quartz Clock Movement Second-Hand

  Second hands for quartz clock movements that take a battery. The second hands come in Black / Gold / or Red. They are measured from the mounting post to the end of the long side pointer of the hand.

  SH1: $1.00

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  #QU22NP Chiming Quartz Clock Movement

  Please select the hands from the next page if you need them, just click Add To Cart and they will show up. 4x4 Westminster Chime Chime synchronization knob Takes one C cell battery Made by Takane Built in speaker 7/16 Diameter Post Low price chiming unit that does not take up much room. The bob is the round disk on... View Product

  QU22NP: $40.00

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Chiming Quartz Clock Movement by Seiko

  Reliable and durable this chiming quartz clock movement is a quality movement by Seiko. Please scroll down to learn about replacing or building clocks with this unit.

  QU30P: $50.00

  View Product

• turned_in_out Ships Bell Alternatives

  #QU30NP Chiming Seiko Quartz Clock Movement

  Automatic night silence switch NON Pendulum Takes one C cell battery Seiko durability Detachable speaker 5/16 Diameter post Please choose length of post Quality C cell dual chime movement by Seiko. Will play either Westminster or Whittington on the quarter hour. Please select the free hands from the next page if you need them, just click Add To Cart and... View Product

  QU30NP: $50.00

  View Product

• turned_in_out Time Only Clock Movements

  Time-Only Quartz Clock Movement

  When replacing a Time-only quartz clock Movement, measure the threads on the post. This is done on the old Low-Torque Quartz Clock Movement. Then match that measurement up for a new one. [bulk-discount-shortcode sku="M2"]

  M2: $14.00

  View Product

• turned_in_out 1 1/2 Inch (38mm)

  Serpentine Variant Quartz Hands #H13

  Serpentine Variant Quartz Hands #H13 will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down.

  H13-1: $1.00

  View Product

• turned_in_out 2

  Christmas Chiming Clock Movement

  Plays choice of 5 Chimes Westminster, Bell Westminster, Ave Maria, Gong Chime or 4 Christmas Songs. Has an Chime on and off setting along with an auto night feature and volume control.

  QU60P: $60.00

  View Product

• turned_in_out Hermle Quartz Clock Movements

  New Quartz Chiming Movement

  Replacement movements for the German made Hermle quartz. These chiming units take two C-cell batteries and play two different songs. Well made German quartz movements that last for a long time, but seem to give up the ghost during daylight savings when they do die.

  MSO-1: $65.00

  View Product

• turned_in_out Hardware for Clocks

  German Clock Hand Nuts

  German clock hand nuts for post 1950 clock movements. Fits Hermle, Kieninger, Urgos, Jauch and more. However these hand nuts will not work on a cuckoo clock. Cuckoo clock hand nuts are available on the cuckoo parts page.

  CP9: $10.00

  German Clock Hand Nuts quantity

  ADD TO CART

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Movement Holder Cup

  Holds a standard 2 1/8 square AA quartz movement. The clock dial can mount to this holder and then the clock can be hung on the wall. Provides a wider base support against the wall so it will not wobble around with long hands when a high torque unit is used. Can also be used as it is with the... View Product

  JH2: $5.00

  Quartz Movement Holder Cup quantity

  ADD TO CART

• turned_in_out Round Quartz Clock Inserts

  Clock Insert For 2-3/8-Hole #F3B

  Clock insert #F3B is a round friction fit clock that is 2 5/8 (67mm) wide. It fits snug in a 2 3/8 (60mm) hole, with an overall depth of 1 1/16 (27mm). [bulk-discount-shortcode sku="F3B"]

  F3B: $14.00

  View Product

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Steel Hanger

  Steel hanger for hanging a quartz clock movement. This hanger allows the clock to hang on the wall without attaching anything to the case. Fits AA battery movements only.

  Q-HANG: $0.40

  Quartz Clock Steel Hanger quantity

  ADD TO CART

• turned_in_out Quartz Clock Movement Parts and Accessories

  Quartz Clock Pendulum

  A quartz clock pendulum rod and bob. The bob comes in three sizes as listed on the order menu. Overall max length is 16 inches. This will work on any quartz clock movement offered by Clockworks.

  Q-BOB: $6.00 – $8.00

  View Product