Search results: “kit” – Page 10

Showing 145–160 of 166 results

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Decoration Log-Pile

  Cuckoo clock decoration log-pile. A stack of wood logs for a cuckoo clock to decorate the case. To be used usually with the wood chopper figurine on a cuckoo clock. Measures 1 1/2 inches (38mm) tall and 1 1/2 inches (38mm) long.

  RC7: $12.00

  Cuckoo Clock Decoration Log-Pile quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Chain Hook Set

  Installation of the cuckoo chain hook and ring set is easy. Each link on the chain is only a wire folded into a unsoldered loop only. With two needle nose pliers a simple twist is all that is is needed to open the link.

  CU15: $8.00

  Cuckoo Chain Hook Set quantity

  ADD TO CART

• turned_in_out Cable Driven Movements

  1171-890 Hermle Clock Movement

  1171-890 Hermle Clock Movement is a Triple Chime unit with 9 Tubes on the back. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.

  1171-890/114: $2,175.00

  1171-890 Hermle Clock Movement quantity

  ADD TO CART

• turned_in_out Chain Driven Movements

  241-081 Hermle Clock Movement

  The 241-081 Hermle Clock Movement runs 8 days on a single wind up. It has one hammer on the top that strike one included bell. The 241-081 Hermle Clock Movement will strike out the top of the hours, and then once for the half hour.

  241-081/75: $199.00

  241-081 Hermle Clock Movement quantity

  ADD TO CART

• turned_in_out Chain Driven Movements

  Cuckoo Clock Movement Regula-34

  The Regula 34 cuckoo clock movement has an 8 day run time. It will have a mark with 34 either alone or some other numbers along with this number. When replacing, please check the old one for this mark.

  R34: $220.00 – $280.00

  View Product

• turned_in_out Cuckoo Clock Parts

  Cuckoo Head Dressing Mounts

  Cuckoo head dressing mounts attach to the roof of the cuckoo clock case itself. The head dressing would have two small screws that lock into these mounts. This way the head dressing can sit on top of the cuckoo clock case firm but removable.

  CU23: $6.00

  Cuckoo Head Dressing Mounts quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Bellow Top Epoxy Adhesive

  Cuckoo bellow tops use epoxy when replacing a worn top with a new one. The epoxy also works well to glue broken cuckoo wood case parts back together.

  CU27: $6.00

  Cuckoo Bellow Top Epoxy Adhesive quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Movable Bird

  Three inch cuckoo bird that opens its mouth when the tail is goes up. The cuckoo bird installs with a single set screw (included) holding it onto a bent wire rod. Loosen this set screw and unhook the door wire and the bird will fall out.

  CU11: $15.00

  Cuckoo Clock Movable Bird quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Replacement Cuckoo Clock Chain

  These chains are sold in single 6FT lengths and come in various links per foot (LPF). Count the LPF in the existing chain and match it up. Or go by who made the clock movement instead.

  CU8: $18.00 – $40.00

  View Product

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Wire Assortment

  Includes bellow lifting wires in various lengths, eye hole wires, cuckoo bird door wires and the bird to door wire. This is all the wires that maybe needed upon a cuckoo clock restoration.

  CU25: $20.00

  Cuckoo Clock Wire Assortment quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Trapezoid Cuckoo Clock Bellow-Tops

  These Trapezoid bellow-tops measure 2 1/4 x 2 and tapers to 1 inch. Cloth material make up the actual bellow. These are sold as a pair.

  CU3: $36.00

  Trapezoid Cuckoo Clock Bellow-Tops quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Clock Dial Key Grommets

  Three winding hole key grommets 3pk to be used on a clock dial with a 3/8 wide hole. They are to be installed on the dial after drilling out the winding arbor holes.

  CP32: $5.00

  Clock Dial Key Grommets quantity

  ADD TO CART

• turned_in_out Case / Mounting Parts

  Clock Wood Screw Assortment

  A large assortment of smaller sized wood screws all brass tone for case work or movement mounting. This is the best assortment for mounting mantle or cuckoo clock sized clock movements.

  CP19: $25.00

  Clock Wood Screw Assortment quantity

  ADD TO CART

• turned_in_out Square Clock Dials

  Heavy Cottage Clock Dial

  This dial is made of heavy painted metal and is 6 3/4 wide. Beautiful classic look with roman numerals.

  sd675wrcott: $30.00

  Heavy Cottage Clock Dial quantity

  ADD TO CART

• turned_in_out Square Clock Dials

  Square Cottage Clock Dial

  This is a very popular dial that is made of metal. It also features numerals in black paint and measures 7 3/8 inches in diameter with a 6 inch time track.

  SD75IACOTT: $15.00

  Square Cottage Clock Dial quantity

  ADD TO CART

• turned_in_out Square Clock Dials

  Square Bracket Clock Dial

  Available in Arabic numerals this is a gold dial with a silver time track. 7 1/2 inch overall with a 6 inch time track.

  SDA75NP: $65.00

  Square Bracket Clock Dial quantity

  ADD TO CART