UPS

Showing 145–160 of 201 results

  • launch

    View Product

    View more

    turned_in_out Wall or Mantle Clock Kits

    Mechanical Westminster Vienna Clock Kit

    Mechanical Westminster Vienna clock kit's minimum case requirements are 4 1/2″ deep, 8″ wide. The Pendulum length comes in 55cm, 66cm, 75cm, or 85cm. This CM is the overall length of the pendulum from the TOP of the movement and down.

    WMKIT13: $1,165.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    NEW 471-050 Clock Movement by Hermle

    The 471-050 Hermle movement is a Westminster Chime unit with 8 hammers on the back. This high quality German movement comes pre oiled and includes its chains, leader, suspension spring and hand nut.

    471-050: $728.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Grandfather Clock Weights

    Polished Complete Clock Weight

    Complete clock weight in polished Brass tone. Comes with top and bottom caps, hardware and lead center filler. Please see the information tabs for the weight specifications required for the clock.

    WEIGHT: $80.00$140.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Hands

    Powerful Quartz Tower-Clock Movement

    Tower clock movement for running the longest hands possible with a battery. Please note this unit is not weatherproof. The long hands for these movements are sold separately

    HT3: $20.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Moon Dials

    Presidential Grandfather Clock Moon Dial

    Presidential Grandfather Clock Moon Dial is 11 wide x 15 1/2 inches tall to the top of the hump. Additionally, it has Arabic numerals on a silver time track and elaborate decorations throughout.

    MDPRES: $270.00$290.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical to Quartz Conversion

    Quartz Conversion Grandfather-Clock Moon-Dial

    A genuine mechanical phase of the moon clock dial that we modify to accommodate the QU40 quartz movement. This dial must attach to the wood case. The moon disk is a decoration only. It will not turn.

    QCMoon: $100.00
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Kits

    Round Dial Grandfather Clock Kit

    Round dial grandfather clock-kit's minimum case requirements are 8" deep, 12" wide, 52" tall. Any smaller clock case and this kit will not work. The German made grandfather clock movement is triple chime and cable driven.

    GFKIT6: $1,600.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Side Chime-Block Westminster Clock

    This is a Chime-Block for a Side Chime Westminster mechanical clock movement. The length of the chime rod is measured overall and through the block itself. This measurement is 13 3/4 inches for that longest rod all the way through.

    GO1-BFlat: $70.00
  • launch

    View Product

    View more

    turned_in_out Grandmother Clock Kits

    Side-Strike Tall Case Clock Kit

    Side-Strike Tall Case Clock-Kit has a minimum case requirement of 4″ deep, 11″ wide including the dial (6 1/2" without), 49″ tall with the dial. Has a 100cm (39 1/2") pendulum length from the top of the movement and down.

    GMKIT8: $950.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    SideStrike BimBam 3-rod ChimeBlock

    SideStrike BimBam 3-rod ChimeBlockk is for a 3 hammer clock and is 19 1/2 inches long tip to tip. Comes with two mounting bolts with washers. Mount to the front or back of the clock case.

    GO1.241030: $35.00
  • launch

    View Product

    View more

    turned_in_out Mechanical to Quartz Conversion

    Straight Rod Lyre Pendulum

    This 34 inch long pendulum has completely straight rods. It also has a 6 5/8 wide pendulum bob. This is usually sold for Hermle floor clock movements. However it also works well with the quartz conversion kit. This is the perfect pendulum for simplicity and elegance.

    Lyre94cm6.5: $154.80
  • launch

    View Product

    View more

    turned_in_out Grandmother Clock Kits

    Tall-Case Grandfather Clock Kit

    Tall-Case Grandfather Clock Kit with a German made clock movement. It is chain driven with an 8 day run time on a single wind.

    GMKIT6: $1,350.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Moon Dials

    Tempus-Fugit 271-053 Clock Dial

    A dial for the Hermle chain driven 241-033 series clock in Tempus-Fugit style. Measuring 9 7/8 x 13 7/8 tall to the top of the hump. This clock dial has the locking four feet that come out of the back

    TF241033: $100.00
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Moon Dials

    Tempus-Fugit Style Clock Dial

    Tempus Fugit dial has no phase of the moon function. However it says Tempus Fugit on the top hump instead.

    TFdial: $90.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    Time-Only Mechanical Clock Movement Kit

    Replacement movement made in India for the USA made Time-Only Clock Movement cases such as Banjo clocks. These are more like 10 year movements instead of the long lasting USA units made in the antique times.

    TOMECH: $100.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Kits

    Triple-Chime Grandfather Clock Kit GFKIT1

    The Triple-Chime kit is a standard size for large grandfather clock cases. Includes a German made mechanical clock movement that is cable driven. The three song options are selected by a switch that goes through the dial.

    GFKIT1: $1,800.00
    View Product