Search results: “Cable” – Page 11

Changing a Clock Cable
Changing a Clock Cable

Changing a Clock Cable Changing a clock cable requires the movement to be out of the clock case. These instructions refer to post WW2 modern grandfather units of German origin, however all makes have a similar method. Swapping the cable is easy. There is a big hole and a little hole on the cable mount. The cable end fits into the big hole, then slides over to seat into the little hole. When the lock is set, it seats in...

See more articles about Cable ⇲

Showing 161–176 of 209 results

  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    271-053 Hermle Clock Movement

    The Hermle 271-053 114cm clock movement runs 8 days on a single wind up and comes only in 114cm pendulum length. It has three hammers on the back of the 271-053 Hermle Clock Movement.

    271-053/114: $225.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    241-081 Hermle Clock Movement

    The 241-081 Hermle Clock Movement runs 8 days on a single wind up. It has one hammer on the top that strike one included bell. The 241-081 Hermle Clock Movement will strike out the top of the hours, and then once for the half hour.

    241-081/75: $199.00
  • launch

    View Product

    View more

    turned_in_out Hamilton

    1050-020 Hermle Clock Movement

    The 1050-020 clock movement runs 8 days clock on a single wind up and takes a number 8 clock key. It has eight hammers on the bottom that will chime your choice of three melody options.

    1050-020: $435.00
  • launch

    View Product

    View more

    turned_in_out Hamilton

    131-041 Hermle Clock Movement

    The 131-041 25cm clock movement runs 8 days on a single wind. The 131-041 Hermle Clock Movement has one hammer on the back of the unit to strike a gong.

    131-041/25: $225.00
  • launch

    View Product

    View more

    turned_in_out Hamilton

    131-081 Hermle Clock Movement

    The 131-081 18cm Hermle Clock Movement runs 8 days on a single wind. It has two hammers towards the top with a included bell. The movement will strike out the top of the hour via the bell, and then once for the half hour.

    131-081/18: $225.00
  • launch

    View Product

    View more

    turned_in_out Hamilton

    130-678 Hermle Clock Movement

    The unit runs 8 days on a single wind up. It has two hammers on the back that strikes two included bells. The 130-678 Hermle Clock Movement will strike out the top of the hours, and then once for the half hour.

    130-678: $225.00
  • launch

    View Product

    View more

    turned_in_out Pendulum Sticks

    Stick Pendulum – Kieninger Clocks

    The CM number off of the clock movement itself is required to get the right pendulum. This information is not on the paper work and not on the wood case, it is only on the back of the movement.

    K-WS-PEND: $42.00$102.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Large Lyre Pendulums

    Kieninger Clock Lyre Pendulum

    You need the CM number off of the clock movement itself to get the right pendulum. This information is not on the paper work and not on the wood case, it is only on the back of the movement.

    K-L-PEND: $132.00$192.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Kieninger

    NEW RWS Kieninger Clock Movement

    Replacing a movement is less costly than a overhaul. The RWS Kieninger Clock Movement last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace.

    KIEN-RWS: $850.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Kieninger

    NEW SPS Kieninger Clock Movement

    The SPS 54cm Kieninger Clock Movement is wound up with three mainsprings and lasts 8 days on a single wind up. Westminster with 5 hammers on the side the movement.

    KIEN-SPS: $359.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    NEW H Series Kieninger Clock Movement

    H Series Kieninger Clock Movement is a large 6 x 9 chain driven that would say Kieninger on the movement and 116cm. Available in Westminster only (8 hammers 4 4) or triple chime (12 hammers 4 8).

    KIEN-H: $1,800.00$4,999.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Case Spiral Finial

    Brass decorative spiral finial that is very heavy for its size. This is the top decoration for a grandfather clock case. The finial is 4 1/2 inches tall. The threaded screw is 4.5mm wide and the ball base is 48mm wide.

    CP11: $25.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Case Eagle Finial

    Clock Case Eagle Finial Brass decorative eagle finial that is very heavy for its size. This is the top decoration for a grandfather clock case. The finial is 4 1/2 inches tall. The threaded screw is 4.5mm wide and the ball base is 48mm wide.

    CP12: $30.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Count Wheel Clips

    Three pack of count wheel clips for American made mechanical clocks. These clips hold the count wheel to the main wheel on a Antique time and strike clock movement.

    CP31: $5.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Mantle Clock Case Back

    Black metal case back for sound quality and dust protection on a mantel clock case. The round portion of this case back is 4 1/2 inches without the hook portion. This case back is easy to install on the back of the mantle clock.

    CP13: $10.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Clock E-Style Clip Washers

    Split Clock E-Style clip Washers are similar to C clips as they attach various parts to the movement. These E-style clip washers get lost frequently as they are small and tend to fly off when removed.

    CP17: $12.00