show all Products Articles

Search Results for kit

36 Items Found

  • launch

    View Article

    View more
    Hermle Clock Code Letters

    The intent of this post is to explain the Hermle Clock Code Letters that follow the movement number on Hermle movement. Sometimes customers think that if the new movement does not have the same letter as the old unit that it will not be the same. This is not always the case. This is what follows a typical Hermle number... View Product

  • launch

    View Article

    View more
    Clock Dial Description of Styles

    When creating clocks it is a good idea to know all the options for the dial before deciding what clock to build. The dial is both the most important thing and also the most tricky at times when building a clock. It is most important because that is what people look at all day long. The dial makes or breaks... View Product

  • launch

    View Article

    View more
    Mechanical Clock Hand Nuts

    One of the most common parts a Mechanical clock needs is the hand nut. As we said before, the older the clock the harder things are to find. So, the hand nuts Clockworks offer are for movements made after the 1930's. There were not many standards on what the hand nut size should be on the early clocks. However, prior... View Product

  • launch

    View Article

    View more
    In Response to COVID-19

    In Response to COVID-19, Clockworks has taken all the necessary precautions to ensure the well being and safety of everyone in our clock family. We at Clockworks are all healthy and doing fine up here in the deep woods. We are so fortunate to already be quite a distance from social activity. It is the clock makers usual way. In... View Product

  • launch

    View Article

    View more
    American Clock Movement Replica

    American clock movement replicas are not the same quality as the original but solves the problem. Thus, the clock will be working and striking as it should in a short time. Of course, these movements are made in India but are close in size to many of the American time strike units made between 1900 and 1950. Think of them... View Product

  • launch

    View Article

    View more
    Clock Movement Parts Information

    All clocks need some sort of power to run them. This power can come from a battery, or electricity, or a clock weight. It might even be a wind-up mainspring. Clockworks.com provides clock movements with each of these power options. The following will have a wealth of clock movement parts information. To build a clock from scratch, all of the... View Product

  • launch

    View Article

    View more
    Jauch Clock Dial Conversion

    These are the instructions for the dial to mount to the wood case instead of the movement on a Jauch clock conversion. If the dial attaches to the movement with four posts coming off the back of, this will have to change. There are two ways the dial mounts to the clock. The best scenario for the conversion is to... View Product

  • launch

    View Article

    View more
    Grandfather Clock Weights Stuck

    The Grandfather clock weights can get stuck in the high position if over wound. Some larger clocks have over wind protection to prevent this. The grandmother and grandfather chain drive units often do not have this feature. When winding the weights up make sure the top of the weight can be seen when done. Never go to the point where... View Product

  • launch

    View Article

    View more
    Clockworks Clock Supply Origin

    Clockworks clock supply origin begins with Nepaug Clockworks in the mid 1940’s by Robert Tonkin. Nepaug is a quaint town in New Hartford, CT. This legacy of Clock repair service began in a barn near the house in Nepaug. Also, additional work with a Jeweler that was across from the old Seth Thomas factory in Thomaston, CT. In 1991 his... View Product

  • launch

    View Article

    View more
    Cuckoo Clock Repair Parts

    The most common Cuckoo Clock Repair Parts sold are the bellow tops and the hands. The bellow tubes are usually good to reuse on the clock, just the bellow tops have cloth that rip over time and therefore the clock will not cuckoo the time out. If the cloth is torn, you do not need to replace the entire cuckoo... View Product

  • launch

    View Article

    View more
    American replica clock movement

    The American replica clock movement's on this page were made on the basis of the most common American units. There was a mass production of these units during the 30s and 40s. Therefore they have a good chance of being a replacement for the worn out movement. By "time strike" units this means the clock tells time and also strikes.... View Product

  • launch

    View Article

    View more
    Building an American antique clock

    Between 1900 and 1945 the Americans made many clock movements with the same theme in common. The most common USA clock movements made during this era were the time and strike 8 day units. Movements for this popular style are no longer made in the USA. India was able to come up with a replica movement. Once on the market... View Product

Shop By Brand

Shop Hermle

Find the perfect Hermle movement for your clock.

Howard Miller

Find the perfect Howard Miller movement for your clock.

Shop Kieninger

Find the perfect Kieninger movement for your clock.

Seth Thomas

Find the perfect Seth Thomas movement for your clock.

Shop Urgos

Find the perfect Urgos movement for your clock.

Ridgeway Clocks

Find the perfect Ridgeway movement for your clock.