Changing a Clock Cable Changing a clock cable requires the movement to be out of the clock case. These instructions refer to post WW2 modern grandfather units of German origin, however all makes have a similar method. Swapping the cable is easy. There is a big hole and a little hole on the cable mount. The cable end fits into the big hole, then slides over to seat into the little hole. When the lock is set, it seats in...
Shop by Category
- Repair Books
- Clock Repair Tools
- Clockworks Clock Repair Service
- Watch Repair
- Battery Operated Clock Movements
- Clock Movements
- Mechanical Movements
- American Clock Movement Reproductions
- Cuckoo Clock Movement
- Spring Driven Movements
- Weight Driven Movements
- Mechanical Clock Kits
- Grandmother Clock Kits
- Hermle Clock Movements
- 130/131 Hermle Clock Movement
- Hermle Clock Movement 140/141
- 241 Hermle Clock Movement
- 261 Hermle Clock Movement
- 340/341 Hermle Clock Movement
- 350/351 Hermle Clock Movement
- 451 Hermle Clock Movement
- 461 Hermle Clock Movement
- Hermle Clock Movement 1050/1051
- 1151 Hermle Clock Movement
- 1161 Hermle Clock Movement
- 1171 Hermle Clock Movement
- Grandfather Clock Kits
- Kieninger Clock Movement
- Urgos Clock Movements
- Jauch Clock Movement
- Clock Parts
- Ships Bell Alternatives
- Mechanical Movements
- All Clock Parts
- Small Specialty Pendulums
- Mechanical Grandfather Clock Weights
- Mechanical Clock Chime Rods
- Chime Accessories
- German Mechanical Clock Pendulums
- Quartz Clock Second Hands
- Super Long Clock Hands
- Hardware for Clocks
- Clock Keys and Cranks
- Cuckoo Clock Parts
- 400 Day Clock Parts
- Clock Dials
- Clock Hands
- Howard Miller
- Clock Tools
- Mechanical to Quartz Conversion
- Repair Kits
- Oiling and Cleaning
- Gallon Solutions
Showing 17–32 of 194 results
turned_in_out Clock Weight AccessoriesHook Clock Weight Pulley
Solid brass cable pulley for Urgos / Kieninger mechanical clock movements. This brass pulley is 1 7/8 inches wide and has a hook for the weight to hang.
turned_in_out Grandfather Clock KitsTriple-Chime Grandfather Clock Kit GFKIT101
The Triple-Chime kit is a standard size for large grandfather clock cases. Includes a German made mechanical clock movement that is cable driven. The three song options are selected by a switch that goes through the dial.
turned_in_out Clock PartsHermle 1161 Movement Parts Front Diagram
Hermle clock movement parts. New parts for the 1161 clock movement for servicing the clock.1161 Parts Front: $5.00 – $100.00View Product
turned_in_out Grandfather Clock KitsMechanical Grandfather Clock Kit
Mechanical Grandfather Clock Kit is cable driven clock kit has a triple chime movement. Will play a chime on the quarter hours. At the top of the hour it will strike out the hourly count when its done with the chime.
turned_in_out Clock Weight AccessoriesMechanical Clock Weight Pulley
Solid brass cable pulley for Hermle / Urgos / Kieninger mechanical clock movements. Available in two sizes 1 3/4 inch diameter or 1 1/4 inch diameter. The grandfather and grandmother clock series will take the 1 3/4 wide pulley.we5: $15.00View Product
turned_in_out Grandfather Clock KitsKieninger Grandfather Clock Kit
The Kieninger grandfather clock kit boasts a cable driven, triple chime, German movement. Kieninger is known to have the thickest plates in the clock industry. Plays 4/4 Westminster, Whittington, or St. Michaels chimes quarterly. Complete with hands, crank, chime block, weights and shells, pulleys, lyre pendulum and 11 x 15 1/2 moon dial.
turned_in_out Clock Keys and CranksGrandfather Clock Key Crank CK6-8
A grandfather clock key is also known as a crank. Available in 8 sizes however if the clock is post WW2 it is always a number 8 that the movement takes. A number 8 crank will fit all three weight cable driven post WW2 clock with a German made movement.
turned_in_out Clock Keys and CranksWalnut Grandfather Clock Crank
German made OEM Kieninger clock crank with a Walnut handle. This crank key is the highest quality. The crank is a size 8 and will fit any cable driven grandfather clock made after 1950.
turned_in_out Clock Keys and CranksMahogany Grandfather Clock Crank
German made OEM Kieninger clock crank with a Mahogany handle. This crank key is the highest quality. The crank is a size 8 and will fit any cable driven grandfather clock made after 1950.
turned_in_out Clock PartsKieninger KSU Movement Parts – Back Diagram
Kieninger KSU Movement Parts - Back Diagram. The German KSU triple chime cable driven clock movement parts are available. Please be sure the clock movement that the parts are purchased for, looks the same as in the following pic.Kien-K PRTS Back: $5.00 – $150.00View Product
turned_in_out Clock PartsKieninger-KSU Clock Movement-Parts – Bottom Diagram
German KSU triple chime cable driven movement parts. New style K series units that are new returns. Some parts are not the same on the older style units. Please be sure to match up the movement to the picture.Kien-K PRTS Bottom: $10.00 – $75.00View Product
turned_in_out KieningerNEW PS Kieninger Clock Movement
The PS Series Kieninger Clock Movement is a cable driven, two weight movement. They come in either gong strike with one hammer, or bim bam strike with three hammers.KIEN-PSG: $540.00View Product
turned_in_out Clock Keys and CranksGrandfather Clock Key Crank
A grandfather clock key is also called a crank. Available in 8 sizes however if the clock is post WW2 the size needed is always number 8. A number 8 crank will fit all three weight cable driven post WW2 clock with a German made movement.CK6: $20.00View Product
turned_in_out Hermle1161-053 Hermle Clock Movement
1161-053 Hermle Clock Movement is a triple chime chain or cable driven unit with three weights. This is a rectangle shaped movement with the movement plate size of 140 x 200mm and takes a size #8 crank (If cable).1161-053: $510.00View Product
turned_in_out Hermle241-030 Hermle Clock Movement
The 241-030 Hermle Clock Movement come in both chain driven or cable driven styles. 241-030 Hermle Clock Movement are all pendulum units with a 85 x 98mm plate size.241-030Clock: $232.50 – $303.00View Product
turned_in_out Hermle1171-850 Hermle Clock Movement
The Hermle clock movement 1171-850 will also replace the obsolete 2071-850. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.1171-850: $847.50View Product
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.