Showing 17–32 of 61 results
turned_in_out Hamilton1161-853 Round-Mechanical Grandfather Clock-Dial
1161-853 Round Mechanical Grandfather Clock Dial with gold trim and Roman numerals. This 11 7/8 (300mm) wide dial fits the Hermle mechanical clock movement 1161-853.
turned_in_out Wall or Mantle Clock KitsMechanical 2-Weight Vienna Clock-Kit
This is an 8 day, Vienna regulator wall clock kit with a German made Hermle clock movement. Kits comes complete with all pieces to put together a complete clock with the exception of the clock case.WMKIT13-1:View Product
turned_in_out Clock Weight AccessoriesClock Weight Top Hook Kit
Brass top Clock Weight Hook Kit for modern German clock movements such as Hermle / Urgos / Kieninger. Comes either with external threads or internal threads. The M* number is the thread size of the screw/bolt, M4 is 4mm, M5 is 5mm.
turned_in_out Mechanical to Quartz ConversionMechanical – Quartz Clock Conversion Kit
Offering an economical alternative to the mechanical replacement unit. Using this kit the clock will no longer need to be wound up or adjusted for time keeping. The clock will now be a battery operated clock instead of a mechanical unit.
turned_in_out Mechanical to Quartz ConversionQuartz Clock Chain Decoration
These come between 5 and 6 foot lengths. You can chop them smaller to hang your weight shells in the air on the quartz grandfather clock conversion kit. These are solid brass and usually go on a mechanical grand father clock.
turned_in_out Chain Driven MovementsJauch PL116 – PL110 Clock Movement
The obsolete Jauch PL116 - PL110 Clock Movement will have a mark of PL116 or PL110 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in.PL116 Kit: $652.50 – $765.00View Product
turned_in_out Chain Driven MovementsJauch 77 Clock Movement
The obsolete Jauch PL77 clock movement will have a mark of PL77 or just 77 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in.PL77 Kit: $405.00 – $480.00View Product
turned_in_out Chain Driven MovementsJauch 78 Clock Movement
The obsolete Jauch PL78 clock movement will have a mark of PL78 or just 78 and some other numbers on the back plate. The Jauch clock company is out of business but there is one of equivalent quality to fit in.PL78 Kit: $405.00 – $480.00View Product
turned_in_out Hardware for ClocksShelf Clock Pendulum Rating-Nuts
Shelf clock pendulum rating nuts are for antique ginger bread or kitchen style type clocks. These clocks require a larger nut hole diameter usually. Also good for larger threaded rating rod diameters on antique floor clocks.
turned_in_out Hardware for ClocksDeep Clock Dial Grommets
Best quality German made clock dial grommets that are deeper than normal for thick dials. Comes with three winding hole key grommets to be used on a clock dial with a 3/8 wide hole.
turned_in_out Clock Dials and BezelsClock Brass Bezel With Glass
One piece Clock Bezels with installed glass. The hinge and glass tabs are included and soldered. The measurements listed are the total outside diameter. This is sold to replace existing bezels and not to make clocks.BZ7: $50.00View Product
turned_in_out Hardware for ClocksFlat Round Clock Glass
Flat round clock glass gets measured from one side to the other. That is the total diameter of the flat round clock glass required. Measure accurately what sized glass would be required for the clock bezel.BZ1: $10.00 – $15.00View Product
turned_in_out Round Clock DialsRound Ivory Clock Dial
Round ivory clock dial in either Arabic or Roman numerals. Please remember to remove the protective plastic coating from the Round gold clock dial before use. The sized listed below are the overall width from side to side.RD3: $5.00 – $12.00View Product
turned_in_out Round Clock DialsRound White Clock Dial
White round dial in either Arabic or Roman numerals. Available in either thin metal aluminum or PVC (It is like thick fiber paper) Remember to remove the protective plastic coating. The sized listed below are the overall width from side to side.RD4: $3.00 – $15.00View Product
turned_in_out Hardware for ClocksClock Dial Key Grommets
Three winding hole key grommets 3pk to be used on a clock dial with a 3/8 wide hole. They are to be installed on the dial after drilling out the winding arbor holes.
turned_in_out Square Clock DialsSquare Cottage Clock Dial
A Cottage style square clock dial made of metal. This dial would mount to a thin board backing by whatever method that is chosen to keep it on.
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.