Search Results for german hands

636 Items Found

• turned_in_out Mechanical Clock Hands

  Grandfather Clock Second Hand

  Second hand sweep for a mechanical grandfather clock with the second hand option. Please choose the movement number that is on the back plate of the brass movement itself.

  CH13A: $13.00

  View Product

• Mechanical Cable Driven Clock Instructions

  Removing the old one How to make a Seat Board Preparations to the new Hanging the weights Pendulum Assembly Setting the beat Adjusting the hammers If it wont chime Setting the strike Putting on the dial Installing the hands Making it chime on time A spot to put the clock

  LEARN MORE

• Mechanical Chain Driven Clock Instructions

  Removing the old one How to make a Seat Board Installing the chains Hanging the weights Pendulum Assembly Setting the beat Adjusting the hammers If it wont chime Setting the strike Putting on the dial Installing the hands Making it chime on time A spot to put the clock

  LEARN MORE

• turned_in_out Hardware for Clocks

  American Clock Hand Nuts

  A mixture of steel and brass American clock hand nuts. This is a 12 pack of hand nuts that are all the same thread size. They are likely to fit American time strike units made from around 1930 to 1950's.

  CP14: $15.00

  American Clock Hand Nuts quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Hands

  Hour and minute hand for post 1950 cuckoo clocks. The hands are measured by the minute hand length from end to end. The hour hand comes with the set of hands and does not get measured.

  CU10: $10.00

  View Product

• Hands For Mechanical Clocks

  For many dial diameters. These fit most German mechanical clock movements. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole. For Hermle mechanical movements as well as Urgos. 5" Dial diameter only. These fit most German mechanical clock movements. The minute hand has a 2.2mm square mounting hole, the hour hand has... View Product

  LEARN MORE

• turned_in_out Super Long Clock Hands

  Spade Super-Torque Clock Hands

  Spade super-torque quartz clock hands will only work on a super torque C cell movement. The measurement is done with the minute hand only but the hour hand will come with the set.

  HTH3: $13.00 – $15.00

  View Product

• turned_in_out Battery Clock Hands

  Tapered Quartz Clock Hands #H4

    Tapered quartz clock hands for the time only units sold by Clockworks. The minute hand will have an oblong mounting hole and the hour hand is a round hole.

  H4: $1.00 – $18.00

  View Product
• Clockworks Testimonials

  Thank you so much for your fast reply. The fix worked perfectly. I can't believe I have been living with a clock chiming 10 minutes early for 2 months. Thank you again Gregg Viscomi My clock is up and running now. Thank you for the fast service. Kevin Miller Just to let you know.......my order came today and I've fitted... View Product

  LEARN MORE

• turned_in_out Super Long Clock Hands

  Taper Super-Torque Clock Hands 17 3/4″

  Tapered super-torque quartz clock hands will only work on a super torque C cell movement. These are wide at the base and narrows down to a point. The measurement is done with the minute hand only but the hour hand will come with the set.

  HTH1: $13.00

  View Product

• turned_in_out Battery Clock Hands

  Serpentine Quartz Hands #H1

  Serpentine Quartz Hands #H1 will fit any battery clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole.

  H1: $1.00 – $9.00

  View Product

• turned_in_out Super Long Clock Hands

  Serpentine High-Torque Clock Hands #HTH8

  Serpentine High-Torque Clock Hands for the standard "I" shaft battery clock movements.

  HTH8: $9.00

  View Product

•   Prev
• Next