UPS

Showing 17–32 of 191 results

  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Grandfather Clock Chime-block Back-Strike

    Grandfather Clock Chime-block Back-Strike is mounted to the back of the clock case. The rods already installed into the block and tuned. To get the correct block Count the rods needed in the block. Measured by the length of the longest rod through its mounting block.

    StyleCstr8: $70.00$80.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 2

    Mechanical – Quartz Clock Conversion Kit

    Offering an economical alternative to the mechanical replacement unit. Using this kit the clock will no longer need to be wound up or adjusted for time keeping. The clock will now be a battery operated clock instead of a mechanical unit.

  • launch

    View Product

    View more

    turned_in_out Weight Driven Movements

    K Series Kieninger Clock Movement

    Replacing a movement is less costly than a overhaul. The K series clock movement last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace.

    KIEN-K: $649.00$975.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Weight Driven Movements

    451-053 Hermle Clock Movement

    The Hermle clock movement 451-053 is a Westminster Chime unit with 8 hammers on the back. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut

    451-053: $315.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Large Lyre Pendulums

    Kieninger Clock Lyre Pendulum

    The CM number off of the Kieninger clock movement itself is required to get the right pendulum. This information is not on the paper work and not on the wood case. Rather it would be a stamp on the brass clock movement's back plate instead.

    K-L-PEND: $110.00$160.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Clock Chime-Block Side Strike

    This is a Clock Chime-Block for a Side Strike mechanical clock movement. Available in 5 rod for Westminster units or 8 rods for Triple Chime clock movements. The length is the longest rod within the block from end to end.

    GO1B: $50.00$80.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Weight Driven Movements

    UW32319 Urgos Clock Movement or 32/1 or 32760…

    UW32319 Urgos clock movement plays Westminster chime every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 80cm movement with a 37mm hand shaft length.

    UW32319: $420.00
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Clock Chime-Block Bottom Strike

    This is a Clock Chime-Block for a Bottom Strike mechanical clock movement. The length is the longest rod within the block from end to end. This mounts to the bottom of the clock case so the hammers can chime the song.

    GO1A: $40.00$80.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    351-020 Hermle Clock Movement

    The numbers on the back plate of the 351-020 Hermle Clock Movement is everything one needs to get a replacement. If the numbers match then the movement will match. So if is says 351-020 it will be the correct one.

    351-020: $300.00$315.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Grandfather Clock Chime Block

    Chime block in V shape for many grandfather clocks. This fits many of the German made post 1950 floor clocks. Will mount to the back of the clock case with included screws.

    GO1C: $60.00$120.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Gallon Solutions

    Concentrated Clock Cleaning Solution

    Formulated for mechanical and manual cleaning. Ideal for antique pocket watches and clocks that have protective coatings on its parts. Rinse with water and IMMEDIATELY shake it then blow dry with hair dryer. And shake it again and dry it again.

    CL12: $60.00
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    141-030K Hermle Clock Movement

    The 141-030K Hermle Clock Movement runs 14 days on a single wind. It has rear strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour.

    141-030K: $218.00$259.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Weight Driven Movements

    1151-050 Hermle Clock Movement

    1151-050 Hermle Clock Movement runs 8 days clock on a single wind up. It has hammers that will chime your choice of three melody options. This series has outer plates that measure 120 x 120mm.

    1151-050: $353.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Spring Driven Movements

    1050-020 Hermle Clock Movement

    The 1050-020 clock movement runs 8 days clock on a single wind up and takes a number 8 clock key. It has eight hammers on the bottom that will chime your choice of three melody options.

    1050-020: $368.00
  • launch

    View Product

    View more

    turned_in_out Weight Driven Movements

    Cuckoo Clock Movement Regula-25

    Cuckoo clock movement one day Regula-25. This movement is by far the most common post 1950 cuckoo clock movement used. It is a one day wind unit that uses two weights.

    R25: $120.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical to Quartz Conversion

    47mm Clock Weight Shell

      Polished Clock Weight Shell Only - 1 7/8 x 10 11/16 Inch (47 x 272mm). This is the outer shell only with no lead insert. Good to replace tarnished or stained weight shells that are discolored from being handled. Includes the top hook, bottom nut, end caps and outer shell.

    47mmshell: $35.00