Search results: “quartz hands” – Page 3

Showing 33–48 of 409 results

• turned_in_out German Mechanical Clock Hands

  Spade Variant Clock Hands for German Clocks

  Hour and minute Spade Variant Clock Hands that fit most German mechanical clock movements made after 1950, these are for a 6 inch time track. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

  RC30: $20.00

  Spade Variant Clock Hands for German Clocks quantity

  ADD TO CART

• turned_in_out Mechanical to Quartz Conversion

  Regulator Style Clock Hands for Hermle

  Here are Regulator Style Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

  CH8: $15.00 – $16.00

  View Product

• turned_in_out Super Long Clock Hands

  Spade Super-Torque Clock Hands

  Spade super-torque quartz clock hands will only work on a super torque C cell movement. The measurement is done with the minute hand only but the hour hand will come with the set.

  HTH3: $13.00 – $15.00

  View Product

• turned_in_out Super Long Clock Hands

  Taper Super-Torque Clock Hands 17 3/4″

  Tapered super-torque quartz clock hands will only work on a super torque C cell movement. These are wide at the base and narrows down to a point. The measurement is done with the minute hand only but the hour hand will come with the set.

  HTH1: $13.00

  View Product

• turned_in_out Super Long Clock Hands

  Serpentine High-Torque Clock Hands #HTH8

  Serpentine High-Torque Clock Hands for the standard "I" shaft battery clock movements.

  HTH8: $9.00

  View Product

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Hands

  Hour and minute hand for post 1950 cuckoo clocks. The hands are measured by the minute hand length from end to end. The hour hand comes with the set of hands and does not get measured.

  CU10: $10.00

  View Product

• turned_in_out Mechanical to Quartz Conversion

  Mechanical – Quartz Clock Conversion Kit

  This mechanical clock to quartz conversion kit is sold in the list of part options offered on this page. This conversion would require purchasing the movement, the pendulum drive and hands all separate to create the kit out of what is needed.

  QCON:

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Quartz Chime Clock Movement #QU22

  Reliable and durable this chiming quartz clock movement is made by Takane. Simplistic in its functions and works as a good replacement for many quartz clock movements. 3″ x 4 3/4″ x 1 1/4″

  QU22P-B:

  View Product

• turned_in_out Chiming Pendulum Quartz Clock Movements

  Premium Chime Clock Movement QU40

  Best sound quality on the market. This unit will chime as if it was a big grandfather clock. Also has volume control and an automatic night silence option. 4 9/16″ x 4 3/4″ x 1 1/8″ [bulk-discount-shortcode sku="QU40P"]

  QU40P-B:

  View Product

• turned_in_out Mechanical Clock Hands

  Hermle 1161-853 Mechanical Second Hand

  Hermle 1161-853 Second hand sweep with the second hand option. The movement number must match the number that is on the back plate of the brass movement.

  CH13A-2: $17.00

  Hermle 1161-853 Mechanical Second Hand quantity

  ADD TO CART

• turned_in_out Mechanical Clock Hands

  Grandfather Clock Second Hand

  Second hand sweep for a mechanical grandfather clock with the second hand option. Please choose the movement number that is on the back plate of the brass movement itself.

  CH13A: $13.00

  View Product

• turned_in_out Hardware for Clocks

  American Clock Hand Nuts

  A mixture of steel and brass American clock hand nuts. This is a 12 pack of hand nuts that are all the same thread size. They are likely to fit American time strike units made from around 1930 to 1950's.

  CP14: $15.00

  American Clock Hand Nuts quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  German Clock Hand Nuts

  German clock hand nuts for post 1950 clock movements. Fits Hermle, Kieninger, Urgos, Jauch and more. However these hand nuts will not work on a cuckoo clock. Therefore, Cuckoo clock hand nuts are available on the cuckoo parts page.

  CP9: $10.00

  German Clock Hand Nuts quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Single Cuckoo Clock Hand Bushing

  Minute hand bushing that fits the style cuckoo hands that have a round hole in the minute hand. This is a single bushing.

  CU6: $4.00

  Single Cuckoo Clock Hand Bushing quantity

  ADD TO CART

• turned_in_out Replacement Electric Clock Motor Movements

  Hansen Rear-Set Clock Motor

  Hansen Rear-Set Clock Motor movement is 3 1/4' high x 3' wide x 2 1/8' deep. Handshaft is the shaft that the hands go on, from the front plate of the movement all the way out.

  EL4: $160.00

  View Product

• turned_in_out Replacement Electric Clock Motor Movements

  Hansen Bottom-Set Clock Motor

  Bottom set electric clock movement. Movement is 5' high x 3' wide x 1 15/16' deep. Handshaft is the shaft that the hands go on, from the front plate of the movement all the way out.

  EL3: $160.00

  View Product