Changing a Clock Cable Changing a clock cable requires the movement to be out of the clock case. These instructions refer to post WW2 modern grandfather units of German origin, however all makes have a similar method. Swapping the cable is easy. There is a big hole and a little hole on the cable mount. The cable end fits into the big hole, then slides over to seat into the little hole. When the lock is set, it seats in...
Shop by Category
- Clock Movements
- Mechanical Movements
- Grandmother Clock Kits
- Hermle Clock Movements
- 451 Hermle Clock Movement
- 461 Hermle Clock Movement
- Hermle Clock Movement 1050/1051
- 1151 Hermle Clock Movement
- 1161 Hermle Clock Movement
- 1171 Hermle Clock Movement
- 130/131 Hermle Clock Movement
- Hermle Clock Movement 140/141
- 241 Hermle Clock Movement
- 261 Hermle Clock Movement
- 340/341 Hermle Clock Movement
- 350/351 Hermle Clock Movement
- Grandfather Clock Kits
- Kieninger Clock Movement
- Urgos Clock Movements
- Jauch Clock Movement
- Clock Parts
- American Clock Movement Reproductions
- Cuckoo Clock Movement
- Spring Driven Movements
- Weight Driven Movements
- Mechanical Clock Kits
- Ships Bell Alternatives
- Mechanical Movements
- All Clock Parts
- Hardware for Clocks
- Clock Keys and Cranks
- Cuckoo Clock Parts
- 400 Day Clock Parts
- Clock Dials
- Clock Hands
- Small Specialty Pendulums
- Mechanical Grandfather Clock Weights
- Mechanical Clock Chime Rods
- Chime Accessories
- German Mechanical Clock Pendulums
- Quartz Clock Second Hands
- Super Long Clock Hands
- Repair Books
- Clock Repair Tools
- Clockworks Clock Repair Service
- Watch Repair
- Battery Operated Clock Movements
- Howard Miller
- Mechanical to Quartz Conversion
- Clock Tools
- Repair Kits
- Oiling and Cleaning
- Gallon Solutions
Showing 49–64 of 194 results
turned_in_out Cable Driven MovementsNEW 9-Tubular Bell Kieninger Clock Movement
9-Tubular Bell Kieninger Clock Movement is known as the HTU. This is the only 9 tube that Kieninger has created, so there will be no confusion on getting the right one.
turned_in_out Grandfather Clock KitsTubular Bell Grandfather Clock Kit
Tubular Bell Grandfather Clock Kit is one of the finest quality clock movements made in modern times. Specifically, it plays 4/4 Westminster, Whittington, or St. Michael's chimes each quarter hour and strikes the full hour.
turned_in_out Clock Movements791-081 16.5CM Hermle Skeleton Clock Movement
791-081 16.5CM Hermle Skeleton Clock Movement has one bell on the top. This 791-081 16.5CM Hermle Skeleton Clock Movement is in stock and can ship today.
turned_in_out Grandfather Clock Moon Dials1151-050 Grandmother Clock Moon-Dial
This 9 7/8 x 13 inch phase of the moon dial with Arabic numerals on a silver chapter ring. Fits the Hermle 1151-050 clock movement. There are 4 stand off feet on the back of this dial that attach to the clock movement itself.
turned_in_out 451 Series Moon Dials451-050 Clock Moon Dial 9 7/8 x 13
This 9 7/8 x 13 inch phase of the moon dial with Arabic numerals on a silver chapter ring. Fits the Hermle clock movement 451-050.
turned_in_out 1161 Series Moon Dials1161-853 Clock-Dial White-Floral Calendar
1161-853 Clock-Dial White-Floral Calendar moon dial that is 11 x 15 1/2 inches and made for the Hermle 1161-853 movement. The dial has Arabic numerals on a silver chapter ring and raised decorations throughout.
turned_in_out Wall or Mantle Clock KitsMechanical 2-Weight Vienna Clock-Kit
This is an 8 day, Vienna regulator wall clock kit with a German made Hermle clock movement. Kits comes complete with all pieces to put together a complete clock with the exception of the clock case.WMKIT13-1: $1,170.00View Product
turned_in_out Wall or Mantle Clock KitsMechanical Westminster Vienna Clock Kit
Mechanical Westminster Vienna clock kit's minimum case requirements are 4 1/2″ deep, 8″ wide. Pendulum length 55cm, 66cm, 75cm, or 85cm. This CM is the overall length of the pendulum from the TOP of the movement and down.
turned_in_out HamiltonMechanical Mantel Westminster Clock-Kit
Mechanical mantel Westminster clock kit’s minimum case requirements are 3 1/2″ deep, 7 1/4″ wide with the dial, 7 1/4″ tall with the dial. The German made clock movement is spring driven, 8 day, with a balance instead of a pendulum.
turned_in_out HamiltonMechanical Clock Kit Bell-Strike
Mechanical clock kit - bell strike’s minimum case requirements are 2 1/2″ deep, 6″ wide including the dial, 8 1/2″ tall with the dial. Has a 18cm (7 1/4") pendulum length from the top of the movement and down.
turned_in_out HamiltonMechanical Shelf Clock-Kit Bell-Strike
Mechanical Shelf Clock-Kit Bell-Strike's minimum case requirements are 3″ deep, 6″ wide with the dial (4 3/4″ with out), 8″ tall with the dial. Has a 18cm (7 1/8″) pendulum length from the top of the movement and down.
turned_in_out HamiltonMechanical Shelf Clock-Kit Gong-Strike
The Mechanical Shelf Clock-Kit Gong-Strike minimum case requirements are 3 1/4″ deep, 6″ wide with the dial (4 3/4″ with out), 11″ tall with the dial. Has a 25cm (9 7/8″) pendulum length from the top of the movement and down.
turned_in_out Wall or Mantle Clock KitsMechanical Wall Clock-Kit Gong-Strike
The Mechanical wall clock-kit gong-strike minimum case requirements are 3 1/4″ deep, 6 1/4″ wide including the dial, 25 1/2″ tall with the dial. Has a 55cm (22") pendulum length from the top of the movement and down.
turned_in_out Wall or Mantle Clock KitsWestminster Vienna Regulator Clock-Kit
Westminster Vienna Regulator Clock-Kit has a minimum case requirement of 4 1/2″ deep, 7 1/2″ wide. Pendulum length 55cm, 66cm, 75cm, or 85cm. This CM is the overall length of the pendulum from the TOP of the movement and down.
turned_in_out K or MS Series Moon DialsKieninger SKS Clock Moon Dial
Kieninger SKS Clock Moon Dial that is 11 wide x 15 1/2 inches tall to the top of the hump. The dial has Arabic numerals on a silver chapter ring. The entire dial has raised decorations throughout.