Search results: “clock kit” – Page 4

Showing 49–64 of 146 results

  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    241-033 Hermle Clock Movement

    The 241-033 Hermle Clock Movement runs 8 days on a single wind up. It has three hammers on the side that play the bim bam style strike.

    241-033: $210.00$303.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cable Driven Movements

    241-840 Hermle Clock Movement

    The 241-840 Hermle Clock Movement runs 8 days on a single wind up. It has one hammer on the back that will strike a gong or bell. The movement will strike out the top of the hours, and then once for the half hour.

    241-840: $247.50$340.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Bellow Tops

    Cuckoo Clock Bellow Tops are replaced when the bellow cloth is ripped. These are sold as a pair of two, left and right.

    CU4: $15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Dials and Bezels

    Clock Brass Bezel With Glass

    One piece Clock Bezels with installed glass. The hinge and glass tabs are included and soldered. The measurements listed are the total outside diameter. This is sold to replace existing bezels and not to make clocks.

    BZ7: $50.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Flat Round Clock Glass

    Flat round clock glass gets measured from one side to the other. That is the total diameter of the flat round clock glass required. Measure accurately what sized glass would be required for the clock bezel.

    BZ1: $10.00$15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Round Clock Dials

    Round Ivory Clock Dial

    Round ivory clock dial in either Arabic or Roman numerals. Please remember to remove the protective plastic coating from the Round gold clock dial before use. The sized listed below are the overall width from side to side.

    RD3: $5.00$12.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Round Clock Dials

    Round White Clock Dial

    White round dial in either Arabic or Roman numerals. Available in either thin metal aluminum or PVC (It is like thick fiber paper) Remember to remove the protective plastic coating. The sized listed below are the overall width from side to side.

    RD4: $3.00$15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    1151-053 Hermle Clock Movement

    1151-053 Hermle Clock Movement runs 8 days clock on a single wind up. It has hammers that will chime your choice of three melody options. This series has outer plates that measure 120 x 120mm.

    1151-053: $382.50
    View Product
  • launch

    View Product

    View more

    turned_in_out Hamilton

    241-080 Hermle Clock Movement

    The 241-080 Hermle Clock Movement runs 8 days on a single wind. It has one hammer on the top that strike one included bell. The 241-080 Hermle Clock Movement will strike out the top of the hours, and then once for the half hour.

    241-080: $255.00$348.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cable Driven Movements

    1171-890 Hermle Clock Movement

    1171-890 Hermle Clock Movement is a Triple Chime unit with 9 Tubes on the back. This high quality German movement comes oiled and includes its leader, suspension spring and hand nut.

    1171-890/114: $1,747.50
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    241-081 Hermle Clock Movement

    The 241-081 Hermle Clock Movement runs 8 days on a single wind up. It has one hammer on the top that strike one included bell. The 241-081 Hermle Clock Movement will strike out the top of the hours, and then once for the half hour.

    241-081/75: $199.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Dial Key Grommets

    Three winding hole key grommets 3pk to be used on a clock dial with a 3/8 wide hole. They are to be installed on the dial after drilling out the winding arbor holes.

    CP32: $5.00
  • launch

    View Product

    View more

    turned_in_out Square Clock Dials

    Square Cottage Clock Dial

    A Cottage style square clock dial made of metal. This dial would mount to a thin board backing by whatever method that is chosen to keep it on.

    SD75IACOTT: $15.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Hand Carved Cuckoo Clock Top

    The Hand Carved Cuckoo Clock Top features detailed hand carved craftsmanship on dark pine wood. Two hand carved shot guns over the hand carved Code of Arms Shield and hand carved maple leaves. A unique addition to any woodworkers collection for creating Cuckoo Clock timepieces. There are two clips in the back that connect to the case.

    RC40-1-2: $50.00$70.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Chimney Roof

    Cuckoo Clock Chimney Roof . Gorgeous carved wood hand painted and stained for a glossy dark finish. Features a chimney sweep figurine pops out of chimney! Measures about 10 inches wide and 6 inches across from its longest points.

    RC36-1-1: $50.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Woodman’s Roof

    Cuckoo Clock Woodman's Roof. Gorgeous carved wood hand stained for a glossy dark finish. Features a shingled roof design. Measures about 9.5 inches wide and 5.5 inches across each side of the roof.

    RC36-1: $50.00