Search results: “cuckoo” – Page 4

Replacing Cuckoo Bellow Tops

Disconnecting the bellows The lift wires travel from the movement up to the flaps of the old bellow tops. Furthermore, these wires are taken off in order to remove the cuckoo bellows. Usually this is done by opening the loop on the lower end of the lift wire. This is where it connects to the movement's lift arm. Use a small flat head screwdriver to twist open the loop on the wire. Removing the cuckoo bellows Usually, one flat head...

See more articles about cuckoo ⇲

Showing 49–64 of 76 results

  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Figurine Dancers

    Cuckoo clock figurine dancers for the dancer platform. Sold as replacements for the broken and missing usually. These have a small hole on the bottom for the pin that sticks out the dancer platform to go into.

    RC13: $14.40
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Hand Carved Cuckoo Clock Top

    The Hand Carved Cuckoo Clock Top features extensive and beautiful craftsmanship on dark pine wood. Two shot guns over the Code of Arms Shield and hand carved maple leaves. There are two clips in the back that connect to the case.

    RC40-1-2: $60.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Numeral Set

    Celluloid plastic numerals than can be epoxied to the cuckoo dial to replace missing numerals. Comes as one set of Roman numerals from one to twelve. The numerals are measured from top to bottom.

    CU12: $9.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Figurine Beer-Drinker

    Cuckoo Clock Figurine the Beer Drinker with a moving arm. This arm will make the beer drinker drink his beer via the clock movement. He stands 3 inches (76mm) tall and 1 1/2 inches (38mm) wide. There is a choice between a left or right handed

    RC19: $18.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Bird Door

    Cuckoo clock wooden door for the bird to come out of. This wood door has its hinge wire and also the hook on the back for the bird wire to go through installed. It stands 1 1/8 inch (29mm) tall and 1 inch (25mm) wide.

    RC9: $12.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Deer-Head Decoration

    Solid wood deer head for the head dressing on a hunter style cuckoo clock. It is common for the ears to break off and get lost, this deer is the perfect solid replacement. Deer heads are measured from ear to ear.

  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Small Tweezers Set of 5

    Stainless steel tweezers set of five. These are used in cuckoo repair when manipulating wires. They come in different styles and strengths so there will be the right one for the particular application.

    CU16: $20.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Woodman’s Roof

    Cuckoo Clock Woodman's Roof. Gorgeous carved wood hand stained for a glossy dark finish. Features a shingled roof design. Measures about 9.5 inches wide and 5.5 inches across each side of the roof.

    RC36-1: $60.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Gong Wire

    The cuckoo clock coiled gong wire that would mount to the back door. Black metal spiral gong wire is available in three sizes.

    CUGongWire: $6.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Feathered Cuckoo Clock Bird

    A life like cuckoo clock bird with feathers. This is a nice upgrade from the old plastic kind and can be used to replace the old style. This comes with its mounting bracket and set screw.

    RC16: $18.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Replacement Horn

    Hunter Cuckoo Clock Replacement Wooden Horn. These often get lost or broken so we offer these solid wood brown stained replacements. Measurements below are the diameter of the horn.

    RC18: $24.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Blonde Bird-Top

    Hand carved pine wood cuckoo clock rooftop decorative wooden piece 6 3/4 wide made in Germany. Blonde top with walnut brown highlights on maple leaves and a bird at the top of the roof.

    RC39: $60.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Replacement Cuckoo Clock Chain

    These chains are sold in single 6FT lengths and come in various links per foot (LPF). Simply count the LPF in the existing chain and match it up or go by the movement manufacturer.

    CU8: $15.00$40.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Side-Opening Cuckoo Clock Bellows with Tubes

    These bellows are sold as a pair and are side opening. Bellow top flaps will open along the side of the clock case towards the front of the clock. These bellow tops are 2 1/4 x 1 1/4 and are already on the tubes. The sizes in the list represent the length of the tube as well as the bellow... View Product

    CU2: $28.00$40.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    8-Day Regula Cuckoo-Clock Dancer-Movement

    Regula Cuckoo-Clock Dancer Movement is the most common 8 day dancer cuckoo movement in existence. This Regula movement takes 1250 or 1500 gram cuckoo pine cone weights. Comes with a 3 year warranty.

    CUD34: $280.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Back-Opening Cuckoo Clock Bellows with Tubes

    Back-opening cuckoo clock bellows and tubes are sold as a pair. Bellow top flaps will open along the back of the clock case toward the front of the clock. These bellow tops are 2 1/4 x 1 1/4.

    CU1: $38.00
    View Product