Search results: “clock kit” – Page 5

Showing 65–80 of 120 results

  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Deer-Front Decoration

    Cuckoo Clock Deer-Front Decoration Solid Wood Deer Front Case Decoration for a Cuckoo Clock. Stands 4 7/8 inches (124mm) tall and 4 inches (1023=mm) wide.

    RC17: $30.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Replacement Horn

    Hunter Cuckoo Clock Replacement Wooden Horn. These often get lost or broken so we offer these solid wood brown stained replacements. Measurements below are the diameter of the horn.

    RC18: $24.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Figurine Beer-Drinker

    Cuckoo Clock Figurine the Beer Drinker with a moving arm. This arm will make the beer drinker drink his beer via the clock movement. He stands 3 inches (76mm) tall and 1 1/2 inches (38mm) wide. There is a choice between a left or right handed

    RC19: $18.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Bird Unstained-Wood

    Unstained wooden cuckoo clock bird. 3 1/2 inches (90mm) long and 1/2 inch (13mm) wide. Comes with its mount and set screw.

    RC14: $12.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    241-033 Hermle Clock Movement

    The 241-033 Hermle Clock Movement runs 8 days on a single wind up. It has three hammers on the side that play the bim bam style strike.

    241-033: $210.00$303.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cable Driven Movements

    241-843 Hermle Clock Movement

    The 241-843 Hermle Clock Movement runs 8 days on a single wind up. It has one hammer on the back that will strike a gong or bell. The movement will strike out the top of the hours, and then once for the half hour.

    241-843: $277.50$370.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Hand Bushings

    Minute hand bushings that fit the style cuckoo hands that have a round hole in the minute hand. These are sold in a six pack of the same size or a single bushing can be purchased.

    CU6: $3.60$12.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Numeral Set

    Celluloid plastic numerals than can be epoxied to the cuckoo dial to replace missing numerals. Comes as one set of Roman numerals from one to twelve. The numerals are measured from top to bottom.

    CU12: $6.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Deer Antlers

    Cuckoo clock deer antlers made of sturdy plastic with a wooden look. These plastic antlers will not break as easy as the old wooden antlers.

    CU7: $6.00$19.20
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Hands

    Hour and minute hand for post 1950 cuckoo clocks. The hands are measured by the minute hand length from the center of the mounting hole to the end. The hour hand comes with the set of hands and does not get measured.

    CU10: $6.00$9.60
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Cuckoo Clock Pine-Cone Weights

    Cuckoo clock weights are in the form of pine cones. They are sold in gram weight and this gram amount is usually stamped on the weight itself. Cuckoo clocks all take the same weight for all the chains with only a few exceptions.

    CU5: $18.00$48.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Back-Opening Cuckoo Clock Bellows with Tubes

    Side-opening cuckoo clock bellows and tubes are sold as a pair. Bellow top flaps will open the along side of the clock case toward the front of the clock. These bellow tops are 2 1/4 x 1 1/4.

    CU1: $38.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Side-Opening Cuckoo Clock Bellows with Tubes

    Side-opening cuckoo clock bellows are sold as a pair with the tubes attached. Bellow top flaps will open the along side of the clock case toward the front of the clock. These bellow tops are 2 1/4 x 1 1/4 and come already attached.

    CU2: $38.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Round Convex Clock Glass

    Round convex clock glass gets measured from one side to the other, the overall width. When working with a clock bezel it is important to order the right sized clock glass. If the glass is too narrow it will fall out the front of the bezel.

    BZ2: $8.00$70.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Square Clock Dials

    Square Metal Clock Dial

    A square dial made of metal for clocks. A variety of sizes available and come in either Arabic or Roman numerals. This simple dial is useful and inexpensive for your movement projects. These dials are made from .020 ga. metal.

    SDDAGT: $15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Square Clock Dials

    Heavy Paper Clock Dial

    Select Arabic or Roman Numerals, White or Ivory. Measurements are from outside the numeral on one side to outside the numeral on the other side. This would be the time track diameter and this is the ring that travels around the outside of the numerals.

    PDIAL1: $1.00$6.00
    View Product