Search results: “Cable” – Page 6

Changing a Clock Cable
Changing a Clock Cable

Changing a Clock Cable Changing a clock cable requires the movement to be out of the clock case. These instructions refer to post WW2 modern grandfather units of German origin, however all makes have a similar method. Swapping the cable is easy. There is a big hole and a little hole on the cable mount. The cable end fits into the big hole, then slides over to seat into the little hole. When the lock is set, it seats in...

See more articles about Cable ⇲

Showing 81–96 of 209 results

  • launch

    View Product

    View more

    turned_in_out Urgos

    UW6/36 Mechanical Clock Movement

      The spring driven Urgos UW6/36 mechanical clock movement is no longer available. However with modifications the equivalent quality Hermle unit will fit in no problem. These two companies were competitors back at one time.

    UW3/36: From: $330.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Parts

    Urgos UW6-series Clock-Dial-Disk

    The dial-disk is used for the clock movement conversion from Urgos UW6/ series spring driven unit to a Hermle unit. The winding arbor configuration is not the same so we use this disc to cover the old holes.

    DDISK: $15.00
  • launch

    View Product

    View more

    turned_in_out 451 Series Moon Dials

    451-053 Grandfather Clock Dial

    This moon dial is 11 x 15 1/2 with Arabic numerals on a silver chapter ring fits the 451-053 Clock by Hermle. The four dial feet on the back of the dial mount into the movement itself. Has the silent / chime option at 3 O'clock.

    MD451053SY: $150.00
  • launch

    View Product

    View more

    turned_in_out Sligh

    131-070 Hermle Clock Movement

    The 131-070 Hermle Clock Movement has an 8 day run time. The movement will strike out the top of the hour via the bell, and then once for the half hour.

    131-070: $225.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Parts

    Hermle Clock Silence Switch

    This is the Silence switch that comes through the Hermle clock dial to select turn the chimes on or off. It is also the same switch to select which song to play on triple chime clocks.

    Silentsw: $10.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Weight Accessories

    Clock Weight Loop Top Hook

    Clock Weight Loop Top Hook for modern German clock movements such as Hermle / Urgos / Kieninger. This top hook is for chain driven grand mother or grand father clock movements. The hook of the chain will go into the loop of the top hook to hang the weight. This clock weight top hook has an internal M4 (4mm) thread... View Product

  • launch

    View Product

    View more

    turned_in_out Clock Weight Accessories

    Kieninger RWS Clock Pulley

    Clock weight pulley for Kieninger RWS series movements. This holds the type of weight that is split into two weights on one time train. The RWS series weight specification calls for 9.9lbs on the time train and on this movement this weight is split into two.

    Rws-Pulley: $15.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    03X012 Urgos Clock Movement or 3/19 or 03028…

    The UW03X012 Urgos clock movement plays Westminster chime progressively every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 100cm movement with a 53mm hand shaft length.

    UW03X012: $1,950.00
  • launch

    View Product

    View more

    turned_in_out Chain Driven Movements

    03102 Urgos Clock Movement or 3/18 or 03026…

    The UW03102 Urgos clock movement plays Westminster chime every quarter hour. At the top of the hour it will play the full chime followed by striking out whatever hour it is. This is a 116cm movement with a 53mm hand shaft length.

    UW03102: $1,950.00
  • launch

    View Product

    View more

    turned_in_out Mechanical to Quartz Conversion

    Mechanical – Quartz Clock Conversion Kit

    This mechanical clock to quartz conversion kit is sold in the list of part options offered on this page. This conversion would require purchasing the movement, the pendulum drive and hands all separate to create the kit out of what is needed.

  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Kieninger Clock Moon Gear

    Fits most Kieninger floor clock series including KSU, K, MS, MSU, RU, RK, R, SK, SKS. Will not fit older K series and will not fit the H. This moon gear is easy to mount with only one included set screw.

    KSU-MGEAR: $20.00
  • launch

    View Product

    View more

    turned_in_out Grandfather Clock Moon Dials

    Presidential Grandfather Clock Moon Dial

    Presidential Grandfather Clock Moon Dial is 11 wide x 15 1/2 inches tall to the top of the hump. Additionally, it has Arabic numerals on a silver time track and raised decorations throughout.

    MDPRES: $179.00
    View Product
  • launch

    View Product

    View more

    turned_in_out 451 Series Moon Dials

    451-050 Grandfather Clock Dial

    Clock moon dial for the 451-050 westminster and chain driven Hermle grandfather clock movements. 11 x 15 1/2 with Arabic numerals on a silver chapter ring that is 10 inches wide.

    MDMOON: $130.00
  • launch

    View Product

    View more

    turned_in_out 451 Series Moon Dials

    451-053 Clock Moon Dial for Hermle

    This moon dial is 11 x 15 1/2 with Arabic numerals on a silver chapter ring fits the 451-053 Clock Moon Dial by Hermle. The four dial feet on the back of the dial mount into the movement itself. Has the silent / chime option at 3 O'clock.

    MD451053QTC: $145.00
  • launch

    View Product

    View more

    turned_in_out 1161 Series Moon Dials

    1161-853 Grandfather Clock Dial

    A grandfather clock moon-dial that is 11 x 15 1/2 inches and made for the Hermle 1161-853 movement. The dial has Arabic numerals on a silver chapter ring and raised decorations throughout.

    1161-853SY: $180.00
  • launch

    View Product

    View more

    turned_in_out Clock Weight Accessories

    Tall Case Clock Pulley

    Tall case clock pulley for antique floor clocks. This part is what the clock weight will hang onto in the waist of the clock. It is 1 3/4 inches wide, made of brass, and has a steel S hook.

    CP41: $20.00