Showing 97–112 of 146 results
turned_in_out Cuckoo Clock PartsSide-Opening Cuckoo Clock Bellows with Tubes
Side-opening cuckoo clock bellows are sold as a pair with the tubes attached. Bellow top flaps will open the along side of the clock case toward the front of the clock. These bellow tops are 2 1/4 x 1 1/4 and come already attached.CU2: $25.00View Product
turned_in_out Hardware for ClocksRound Convex Clock Glass
Round convex clock glass gets measured from one side to the other, the overall width. When working with a clock bezel it is important to order the right sized clock glass. If the glass is too narrow it will fall out the front of the bezel.BZ2: $8.00 – $70.00View Product
turned_in_out Square Clock DialsSquare Metal Clock Dial
A square dial made of metal for clocks. A variety of sizes available and come in either Arabic or Roman numerals. This simple dial is useful and inexpensive for your movement projects. These dials are made from .020 ga. metal.SDDAGT: $15.00View Product
turned_in_out Square Clock DialsHeavy Paper Clock Dial
Select Arabic or Roman Numerals, White or Ivory. Measurements are from outside the numeral on one side to outside the numeral on the other side. This would be the time track diameter and this is the ring that travels around the outside of the numerals.PDIAL1: $1.00 – $6.00View Product
turned_in_out Round Clock DialsRound Gold Clock Dial
Round gold clock dial in either Arabic or Roman numerals. Please remember to remove the protective plastic coating from the Round gold clock dial before use. The sized listed below are the overall width from side to side.RD2: $5.00 – $8.00View Product
turned_in_out Chain Driven Movements241-030 Hermle Clock Movement
The 241-030 Hermle Clock Movement come in both chain driven or cable driven styles. 241-030 Hermle Clock Movement are all pendulum units with a 85 x 98mm plate size.241-030Clock: $210.00 – $303.00View Product
turned_in_out Cuckoo Clock PartsCuckoo Clock Small Tweezers Set of 5
Stainless steel tweezers set of five. These are used in cuckoo repair when manipulating wires. They come in different styles and strengths so there will be the right one for the particular application.
turned_in_out Cuckoo Clock PartsCuckoo-Clock Front-Dressing Bird Lovers
Cuckoo Clock Front Dressing Bird Lovers A gorgeous visual of two birds resting on a house with maple leaves. Solid, sturdy wood measures about 11 inches tall and 7.5 across at the longest points.
turned_in_out Cuckoo Clock PartsCuckoo Clock Bird Door
Cuckoo clock wooden door for the bird to come out of. This wood door has its hinge wire and also the hook on the back for the bird wire to go through installed. It stands 1 1/8 inch (29mm) tall and 1 inch (25mm) wide.
turned_in_out Cuckoo Clock PartsCuckoo Clock Deer-Head Decoration
Solid wood deer head for the head dressing on a hunter style cuckoo clock. It is common for the ears to break off and get lost, this deer is the perfect solid replacement. Deer heads are measured from ear to ear.RC10: $15.00 – $25.00View Product
turned_in_out German Mechanical Clock PendulumsLarge Oak-Leaf Cuckoo-Clock Pendulum
Oak leaf style cuckoo clock pendulum comes in four lengths. If it is not known what length to get, the 8 inch is most likely the one. The longer ones are pretty rare and are for a very large cuckoo clock.RC3: $25.00View Product
turned_in_out Cuckoo Clock PartsCuckoo Clock Decoration Log-Pile
Cuckoo clock decoration log-pile. A stack of wood logs for a cuckoo clock to decorate the case. To be used usually with the wood chopper figurine on a cuckoo clock. Measures 1 1/2 inches (38mm) tall and 1 1/2 inches (38mm) long.
turned_in_out Cuckoo Clock PartsCuckoo Clock Movable Bird
Three inch cuckoo bird that opens its mouth when the tail is goes up. The cuckoo bird installs with a single set screw (included) holding it onto a bent wire rod. Loosen this set screw and unhook the door wire and the bird will fall out.
turned_in_out Cuckoo Clock PartsCuckoo Clock Hand Nuts
6 nuts and 6 washers to fit the hand shaft of a post 1950 cuckoo clock. This nut is screwed onto the end of the hand shaft to keep the minute hand in place.
turned_in_out Cuckoo Clock PartsReplacement Cuckoo Clock Chain
These chains are sold in single 6FT lengths and come in various links per foot (LPF). The two ways of determining the correct chain is as follows. Count the LPF in the existing chain to match up. Or go by who made the clock movement instead.CU8: $15.00 – $20.00View Product
turned_in_out Cuckoo Clock PartsCuckoo Clock Wire Assortment
Includes bellow lifting wires in various lengths, eye hole wires, cuckoo bird door wires and the bird to door wire. This is all the wires that maybe needed upon a cuckoo clock restoration.
Shop By Brand
Shop HermleFind the perfect Hermle movement for your clock.
Howard MillerFind the perfect Howard Miller movement for your clock.
Shop KieningerFind the perfect Kieninger movement for your clock.
Seth ThomasFind the perfect Seth Thomas movement for your clock.
Shop UrgosFind the perfect Urgos movement for your clock.
Ridgeway ClocksFind the perfect Ridgeway movement for your clock.