Components

launch

question_answer 0 Questions/Answers

View more

turned_in_notComponents

Jauch floor clock pendulums are not made anymore. We can create one out of a Hermle pendulum by cutting it to size, cutting off the top hook, and installing one to fit the Jauch unit. However, we are somewhat hesitant to offer custom pendulums for a Jauch unit. They went out of business so we can automatically say the movement… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notComponents

A clock bezel description consists of the brass part that holds the clock glass in place. It can be confusing to get the bezel and then the flat or convex glass. To buy the clock bezel and then try to get the correct glass separately to put them all together is not easy. It is best to get the clock… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notComponents

Mechanical clock pendulum top hooks replace broken top hooks or to build a new pendulum. This is a nice alternative to replacing an entire clock pendulum if the top is broken or missing. The top hook is the very top of the pendulum that will enable the pendulum to hang on the leader. To clarify, the leader is the 4… View Product

launch

question_answer 1 Questions/Answers

View more

turned_in_notComponents

The Mechanical Clock hands in the list below are sold by dial diameter size. Alternately, this is not the same method as a clock that operates on a battery. Instead, determine the hands for mechanical clocks as an after effect of measuring the dial diameter. Furthermore, a time track is the outer ring that clocks sometimes have just outside the… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notComponents

The German Mechanical-Clock Hand Installation on a German mechanical movement is quite simple. It is the reverse of theremoval. If you are doing a replacement of the movement, or if the hands are new, the minute hand must go through some adjustments. This is so it will point to the correct time when it chimes. First comes the hour hand…. View Product

launch

question_answer 6 Questions/Answers

View more

turned_in_notComponents

A pendulum clock without a pendulum is a shame for sure. Hence, getting the mechanical clock pendulum length correct does take some diving into the clock world. I there is no idea what pendulum it would take, this is a basic guide. Of course, this is a basic guide to narrow it down to the best pendulum for the clock…. View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notComponents

Mechanical clock kit measurements that is needed in order to purchase a new kit are very basic. Of course the most ideal is to purchase the clock kit before building the clock case as described in another section. If the case is already built or working with a empty clock case, these are the things to measure. Clockworks.com tends to… View Product

launch

question_answer 3 Questions/Answers

View more

turned_in_notComponents

If a Hermle clock doesn’t keep proper time, the pendulum may be incorrect. To determine if this is the problem, measure all of the components of the pendulum. Hermle clock pendulum measuring is extremely important. Often enough the CM length stamped on the movement is not the actual pendulum length. Certainly, the CM stamp provides valuable information, however it does… View Product