Movements

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

This is a nice chain driven wall clock movement. The screw or nail in the wall will have to take some weight so be sure it’s well anchored. There are two weights hanging on this movement. Each weighing close to 5 lbs each. This unit was used in the Dutch style clocks with the pear weights. Subsequently it is a… View Product

launch

question_answer 2 Questions/Answers

View more

turned_in_notMovements

The obsolete 241-070 two bell back unit can be replaced with the 241-080 one bell top clock movement. Instead of the bell or bells on the back of the movement it will now be on the top. The one bell top unit is the same in every other way. The plate size to part compatibility and so forth is the… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

Hermle 241 clock movement is a compact chain driven, two weight movement. This unit runs eight days on a single wind up and comes as a pendulum movement only. It is a nice clock for smaller floor clock models and works well in a shaker style case. Other uses include wall clock cases such as a wag on the wall… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

The compatibility between the clock movement 141-040 and 141-070 needs explanation and clarification. At one point in time the same number was used for both versions . What is the difference between the 040 and the 070 Hermle units? The 040 series has a one hammer on the back whereas the 070 units have two bells on the back. It… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

This section is referring to the calendar versions of the Hermle clock movement 141-040 141-030 and 141-033 Many of these units come with a calendar as indicated by the letter K after the movement numbers. This is the usual way some movements are supplied by the manufacturer. This way it covers movements with and without a calendar. In this way… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

Hermle 140 / 141 Clock Movement comes in either the pendulum or non pendulum styles. Such as the pendulum unit 141-040 or the non pendulum balance wheel version such as the 140-010. This is a fourteen day unit, it runs the 14 days on a single wind up. They used to be made to run 8 days only. If the… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

132-071 Clock Movement Installation instructions for a new 132-071 bought from Clockworks. Remove the minute hand by taking off the hand nut. Use a pair of needle nose pliers to gently turn the nut to the left. Once it is loose, you will be able to remove it with fingers. Once the hand nut is off, the minute hand will… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

Hermle 132-071 clock movement is now equipped with a Swiss platform escapement. The quality of this escapement is much improved from the past and easier to time than ever. This ships bell strike clock movement is the only one in production in today’s world. There is no other ships bell clock movement in either mechanical or quartz other than this… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

The 132-071 has a platform escapement. This means is it has a balance wheel rather than a pendulum. When adjusting the timing lever it pushes or pulls the hairspring on the balance wheel. This manipulates the speed of the balance wheel oscillations and therefore the speed of the time. It is done with the lever that sticks out of the… View Product

launch

question_answer 2 Questions/Answers

View more

turned_in_notMovements

If a Hermle clock doesn’t keep proper time, the pendulum may be incorrect. To determine if this is the problem, measure all of the components of the pendulum. Hermle clock pendulum measuring is extremely important. Often enough the CM length stamped on the movement is not the actual pendulum length. Certainly, the CM stamp provides valuable information, however it does… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notMovements

Hermle clock movement 130 – 131 is a round unit with a 90mm plate size diameter. They all take a size 4 clock key (not included), they come oiled and ready to go. The most compact movement produced in the Hermle clock movement line. They fit into the tightest of spaces and come in either pendulum units or balance units…. View Product