Clock Parts

launch

question_answer 0 Questions/Answers

View more

turned_in_notClock Parts

This section is referring to the Clock-Movement Calendar Removal Instructions for calendar versions of the Hermle clock movement 141-040 141-030 and 141-033 Many of these units come with a calendar as indicated by the letter K after the movement numbers. This is the usual way some movements are supplied by the manufacturer. This way it covers movements with and without… View Product

launch

question_answer 7 Questions/Answers

View more

turned_in_notClock Parts

If a Hermle clock doesn’t keep proper time, the pendulum may be incorrect. To determine if this is the problem, measure all of the components of the pendulum. Hermle clock pendulum measuring is extremely important. Often enough the CM length stamped on the movement is not the actual pendulum length. Certainly, the CM stamp provides valuable information, however it does… View Product

launch

question_answer 1 Questions/Answers

View more

turned_in_notClock Parts

For many dial diameters. These fit most German mechanical clock movements. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole. For Hermle mechanical movements as well as Urgos. 5″ Dial diameter only. The most popular choice for German clock movements. These black Serpentine hands come in 4 to 10 inch dial diameters…. View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notClock Parts

A versatile product for multiple types of clocks or craft projects. Use clock Numerals or dial numbers to replace missing ones on the clock dial. Additionally, use these numbers to create a clock dial out of whatever material the clock is to be made out of. Of course, it is always fun to be creative and incorporate these numerals in… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notClock Parts

AmMechanical clock chain installation is fairly easy. It is not uncommon for the chains to sometimes fall off during shipping. If this should occur, all you have to do is loop them back over the ratchet wheels. Mechanical Clock Chains installation maybe required upon the new movements arrival. When getting the new unit, the chains may or may not be… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notClock Parts

The weights may or may not all weigh the same however they usually do not. It is needed to know what weights goes on what chain or cable for most floor clocks in existence. Typically there is differences on the weights from left to right on a mechanical floor clock. This section is referring to post WW2 modern floor clocks… View Product

launch

question_answer 3 Questions/Answers

View more

turned_in_notClock Parts

German Mechanical clock hands Installation is easy and fast. Germans used bushings in both the hour and minute hands. Where as the American units have the bushing in the hour hand only. This section describes the German style with bushings in both. The hour tube will have the round bushing installed, the minute hand will have a bushing that has… View Product

launch

question_answer 0 Questions/Answers

View more

turned_in_notClock Parts

A Grandfather clock moon-dial installation explanation is in this section. Thus, this is written for a new movement installation in mind. However can use it for any post WW2 German mechanical unit with issues in relation to the front of the movement. Install the moon gear onto the new movement prior to the clock moon-dial installation. It mounts with a… View Product

launch

question_answer 12 Questions/Answers

View more

turned_in_notClock Parts

The mechanical clock pendulum assembly does not mean just the pendulum alone. The use of the word assembly means the pendulum consists of three components and not just the pendulum. A pendulum assembly consists of the suspension spring at the top, the leader that hangs on it, and then the pendulum. Usually mechanical clock pendulum makers are not movement makers… View Product

launch

question_answer 4 Questions/Answers

View more

turned_in_notClock Parts

Mechanical clock movement beat-setting means the tick and the tock sound of the clock are even. In order to run, every mechanical clock that has a pendulum needs to be put in beat. It is amazing how many clocks have not run for 10 years or more just because this is not known. Often, clocks in tag sales, auctions, and… View Product