Ordering a Hermle Clock Movement

November 2, 2019 5:24 pm Published by Leave your thoughts

Ordering a Hermle Clock Movement

The movement numbers off of the Hermle clock movement are needed when ordering. The numbers are matched up and it will be the exact same movement as the old one. Replacing the movement is a fraction of the price of a repair, and the clock will be up and working the fastest way.

Clock movement removal and installation

Removing and the installing the clock movement only requires the most basic tools. If you can change the spark plug on your lawn mower this will be a breeze. All the Hermle clock movements are in stock and can ship immediately. We are full time clock makers and retailers both, so if you need any assistance please ask. This goes for the installation or ordering a Hermle clock movement, if you need help please let us know.

Matching the CM when ordering

This note is only if your ordering a movement that has a pendulum. You will need to match up your CM length from the back plate of your old unit to the new one. The options indicated all that is available by stock. If there is a CM number you need but is not listed we can still create it most likely by changing some gears. If this is the situation please just give us a call 800 381 7458. There is an extra fee for the regearing of the movement. Usually this fee is $30 to $40 additional.

Conclusion

Replacing a movement is less costly than a overhaul. These movements last 25 years before needing an over haul, but since its still being made at a fair price it is so much better just to replace. The clock will be problem free right away instead of months, last longer than a overhaul and comes oiled.

Ask a Clock Question

avatar