How to install the clock pendulum
If the new leader is not installed, you will need to put the pendulum leader onto its suspension spring and hang it on the back of the clock. This is done by removing the set screw on the top of the suspension spring. With this set screw out, you can lower the suspension spring and hook on the leader hook to the bottom of the suspension spring and bring it back up to original position. Reinstall the set screw.
Hang the pendulum onto its pendulum leader that you just installed.
These are the steps at this point
- 1. Make it run, by putting in beat
- 2. Install the hands
- 3. Adjust the chime hammers
- 4. Make it chime
- 5. Set the hands to time
- 6. Make it strike