One pint of concentrated ammoniated clock cleaning solution that can be used to clean movements by hand, or to use with a ultrasonic cleaning machine. Just mix 1 part of this solution to 8 -12 parts of water
Attn: The hands for these units will be offered during the checkout process upon hitting the add to cart button.
Tower clock movement for running the longest hands possible with a battery. Please note this unit is not weather proof, it would have to be in a weather proof clock case to be outside.
The MOST powerful tower clock movement is the strongest on the market before getting into the electrical units. They are geared special on the inside of the unit stronger as to take more weight if wanted. This one is stronger than any other High Torque quartz we offer and will also last longer with the very long hands.
The post that is being measured is as described on the above diagram. This is the threaded portion of the movement that goes through the dial face and needs to be long enough to mount the hex nut onto this post, in the front of the dial face. This means the movement is just mounted to the dial and nothing else, then you can put you're hour hand on, and then the minute hand with its nut. The white post that the hands go on is extended further than the regular high torque units to accommodate the special longer hands.
They have a threaded post diameter of 7/16 and a case dimension of 2-3/4'H x 2-3/16'W x 1'D
The long hands for these movements are sold separately
Shiny brass colored aluminum for modern floor clock dials. Measurement is the overall height. The 1 1/8 inch size is for grandmother clocks and the 1 5/16 size is for the grandfather clocks