Quartz Clock Hands
Quartz Clock Hands that will fit any battery movements we offer. There are two types of battery clock hands in the world, one is the China standard and one is the American standard. The China way of using the hands are with round holes in both the hour and minute hands. The American style has an oblong mounting hole in the minute hand and a round hole for the hour hand and fits what is known as an "I" shaft clock movement. What we offer here all fit our "I" shaft movements, in other words they all fit all the movements we sell.
If replacing a quartz clock movement, your old ones may fit the new movement just fine, if you have an oblong hole in the minute. The hour will fit either way, but the minute (longer of the two ) are where the concern is. If in doubt, its best to just get the new ones for your new movement upon checking out. This way its all set and you have everything you need for a smooth movement swap out.
These come in a set, so even though your measuring only the long hand, the shorter one comes with it proportionally smaller. If you need them for a larger dial than 10 inches wide, please see our High Torque movement and hands section. Mounting is easy, the hour hand goes on first as a friction fit, just twist and push on. The minute hand has an oblong mounting hole in it, and this goes on the "I" shaft top of the hand shaft of the movement with its nut. If you have a second hand you would use the nut with a hole in it, if no second hand is used than you would use the cap style nut so it looks pretty.
If you would like a second hand they are in a different section and sold separately as they are optional and not required to run on your new movement.