Mechanical Hands

May 19, 2014 7:22 am Published by Leave your thoughts

German Mechanical

German Spade Hermle german mechanical spade hands

For many dial diameters. These are to fit most German mechanical clock movements. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole.

Clear

CH1: $14.89$19.89

German Maltese German Maltese Style Clock Hands

For Hermle mechanical movements as well as Urgos. 5" Dial diameter only.

CH12: $14.89

German Serpentine German Serpentine Clock Hands

The most popular choice for German clock movements. These black Serpentine hands come in 4 to 10 inch dial diameters. These fit most German movements in existance. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole.

Clear

CH3Hands: $9.89$19.89

German Regulator Style German Regulator Style Clock Hands

These are to fit most German mechanical clock movements. The minute hand has a 2.2mm square mounting hole, the hour hand has a 4.5mm round hole.

Clear

CH8: $17.89

German Spade Variant Clock Hands

Hands for a German mechanical clock such as made by Hermle, Urgos or Kieninger. These hands are for a dial that is 6 inch (15cm) to 6 1/2 inch (17cm) wide from outside the numeral 3 to outside the numeral 9.

RC30: $14.89


American Mechanical

Pierced Spade Pierced Spade American Clock Hands

For 5 inch dial diameter. Choose square or oblong hole in the minute hand. For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on)

Clear

CH7: $9.89

Seth Thomas ST Style American Clock Hands

For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on) This has a square hole in the minute hand.

Clear

CH10: $9.89

Spade Hands American Spade Mechanical Clock Hands

For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on). Specify if the hole in the minute hand is oblong or square. Measurement is the dial diameter

Clear

CH9: $9.89

Maltese American Maltese Mechanical Clock Hands

For American antique movements. (Seth Thomas, New Haven, Ansonia, Gilbert, Waterbury and on) Specify if the hole in the minute hand is oblong or square. Measurement is the dial diameter

Clear

CH11: $9.89


Mechanical Seconds

Second Hand Clock Hands

Second hand sweep for a mechanical floor clock with the second hand option. Please choose the movement number that is on the back plate of the brass movement itself for the correct second hand to be shipped.

Clear

CH13A: $9.89