Hardware for Clocks

Showing 33–48 of 75 results

• turned_in_out Hardware for Clocks

  Clock Repair Hairspring Assortment

  Assortment of 72 clock hairsprings with there collets used in clock repair. Used often on mechanical alarm clock movements and other desk clocks. There are various sized springs and collet diameters in the center.

  CP22: $30.00

  Clock Repair Hairspring Assortment quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Clock Repair Tapered Pins

  Used in clock repair these tapered pins come in an assortment of 50 sizes and diameters. These Clock Parts have many uses in clock repair. For example, they attach some dials, movement plates, suspensions and sometimes hands on the clock.

  CP2: $20.00

  Clock Repair Tapered Pins quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Clock Repair Verge Assortment

  A verge is what engages with the escape wheel in clock repair and comes in an assortment pack of 9. Bend and cut them to fit your application. These are for escape wheels that are outside of the clock plates only.

  CP23: $25.00

  Clock Repair Verge Assortment quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Clock Weight Loop Top Hook

  Clock Weight Loop Top Hook for modern German clock movements such as Hermle / Urgos / Kieninger. This top hook is for chain driven grand mother or grand father clock movements. The hook of the chain will go into the loop of the top hook to hang the weight. This clock weight top hook has an internal M4 (4mm) thread... View Product

  We-Loop-Top: $15.00

  Clock Weight Loop Top Hook quantity

  ADD TO CART

• turned_in_out Clock Weight Accessories

  Clock Weight Top Hook Kit

  Brass top Clock Weight Hooks for modern German clock movements such as Hermle / Urgos / Kieninger. The top hooks are made with external threads or internal threads and also M4 threads or M5 threads.

  WE6: $10.00 – $25.00

  View Product

• turned_in_out Hardware for Clocks

  Clock Winding Arbor Bushings

  Solid brass bushings for use on winding arbors during a clock repair. Sizes are OD 09.8mm x ID 4.0mm, OD 09.8mm x ID 7.8mm, OD 10.8mm x ID 7.8mm and OD 11.8mm x ID 7.8mm.

  CP26: $10.00

  Clock Winding Arbor Bushings quantity

  ADD TO CART

• turned_in_out Case / Mounting Parts

  Clock Wood Screw Assortment

  A large assortment of smaller sized wood screws all brass tone for case work or movement mounting. This is the best assortment for mounting mantle or cuckoo clock sized clock movements.

  CP19: $25.00

  Clock Wood Screw Assortment quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Chain Hook Set

  Installation of the cuckoo chain hook and ring set is easy. Each link on the chain is only a wire folded into a unsoldered loop only. With two needle nose pliers a simple twist is all that is is needed to open the link.

  CU15: $8.00

  Cuckoo Chain Hook Set quantity

  ADD TO CART

• turned_in_out Cuckoo Clock Parts

  Cuckoo Clock Hand Nut Repair Kit

  Cuckoo hand nut repair kit, includes minute hand bushing, large nut and small nut. The large or small both will work, its only a matter of what looks best. These will fit most post 1950 mechanical cuckoo clocks of German origin.

  CU20: $9.00

  Cuckoo Clock Hand Nut Repair Kit quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Deep Clock Dial Grommets

  Best quality German made clock dial grommets that are deeper than normal for thick dials. Comes with three winding hole key grommets to be used on a clock dial with a 3/8 wide hole.

  CP32-1: $7.00

  Deep Clock Dial Grommets quantity

  ADD TO CART

• turned_in_out Case / Mounting Parts

  Extended Post style Clock Mounts for German Units

  Extended Post style Clock Mounts for German Units Extended Post style Clock Mounts for German Units. These fit the Hermle 341 / 141 / 241 OR pick the 351 / 1051. This is the start of the Hermle movement number. This is the stamp on the back plate of the movement itself. The posts have internal threads on one side.... View Product

  RC5: $20.00

  View Product

• turned_in_out Hardware for Clocks

  Flat Round Clock Glass

  Measure flat round clock glass from one side to the other. That is the total diameter of the flat round clock glass. Accuracy is important to get the size glass for the clock bezel.

  BZ1: $14.00 – $35.00

  View Product

• turned_in_out Hardware for Clocks

  French Style Bell Stand

  Solid brass stand off for a bell mount. Stand is 1/2 inch wide, 2 1/8" tall, threaded top with knurled nut for the bell, and a hole in the bottom for a screw mount.

  CP-BellMount: $10.00

  French Style Bell Stand quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  German Clock Hand Nuts

  German clock hand nuts for post 1950 clock movements. Fits Hermle, Kieninger, Urgos, Jauch and more. However these hand nuts will not work on a cuckoo clock. Therefore, Cuckoo clock hand nuts are available on the cuckoo parts page.

  CP9: $10.00

  German Clock Hand Nuts quantity

  ADD TO CART

• turned_in_out Hardware for Clocks

  Gold-Tone Clock Dial Numerals

  Gold-tone aluminum numerals for modern floor clock dials. Measurement options are on the drop down list and is the overall height. The 1 1/8 inch size is for grandmother clocks and the 1 5/16 size is for the grandfather clocks.

  CD2: $20.00

  View Product

• turned_in_out Clock Weight Accessories

  Grandfather Clock Replacement Cable

  Original factory replacement grandfather clock replacement cable for German clock movements. The cables are original and sometimes vary slightly in lengths. They have the ends that lock into the clock movement installed already.

  WE3: $25.00 – $40.00

  View Product