Hardware for Clocks
Showing 49–64 of 75 results
launch
View Product
View moreturned_in_out Hardware for Clocks
Clock Winding Arbor BushingsSolid brass bushings for use on winding arbors during a clock repair. Sizes are OD 09.8mm x ID 4.0mm, OD 09.8mm x ID 7.8mm, OD 10.8mm x ID 7.8mm and OD 11.8mm x ID 7.8mm.
launch
View Product
View moreturned_in_out Hardware for Clocks
Clock Chime Selector RodClock chime selector rod provides an alternative to the chime selection switch. (The switch that would typically come through the dial at 3 o'clock.)
SelectorRod: $15.00View Productlaunch
View Product
View moreturned_in_out Clock Pendulum Parts
Tall-Case Clock Suspension SpringTall-Case Clock Suspension Spring for antique clocks. This one fits the popular tall floor clock made in England or USA with the big bell on the top. This is the spring the holds the pendulum up in the air and lets it swing.
LSus-A: $30.00 – $78.00View Productlaunch
View Product
View moreturned_in_out Hardware for Clocks
Kieninger Clock Moon GearFits most Kieninger floor clock series including KSU, K, MS, MSU, RU, RK, R, SK, SKS. Will not fit older K series and will not fit the H. This moon gear is easy to mount with only one included set screw.
launch
View Product
View moreturned_in_out Case / Mounting Parts
Mantle Clock Case BackBlack metal case back for sound quality and dust protection on a mantel clock case. The round portion of this case back is 4 1/2 inches without the hook portion. This case back is easy to install on the back of the mantle clock.
launch
View Product
View moreturned_in_out Case / Mounting Parts
Clock Case Eagle FinialClock Case Eagle Finial Brass decorative eagle finial that is very heavy for its size. This is the top decoration for a grandfather clock case. The finial is 4 1/2 inches tall. The threaded screw is 4.5mm wide and the ball base is 48mm wide.
launch
View Product
View moreturned_in_out Clock Pendulum Parts
Tall-Case Clock Pendulum SuspensionTall-Case Clock Pendulum Suspension for antique clocks. This one fits the popular tall floor clock made in England or USA with the big bell on the top.
launch
View Product
View moreturned_in_out Hardware for Clocks
Clock Repair Hairspring AssortmentAssortment of 72 clock hairsprings with there collets used in clock repair. Used often on mechanical alarm clock movements and other desk clocks. There are various sized springs and collet diameters in the center.
launch
View Product
View moreturned_in_out Case / Mounting Parts
Small Wood Screw AssortmentIdeal for case work, movement mounting, or a variety of small projects. This is the best assortment of screws for mounting mantle or cuckoo clock movements.
launch
View Product
View moreturned_in_out Hardware for Clocks
Clock Clicks Rivets AssortmentAn assortment of 50 piece click and rivets for mechanical clocks. These are useful to use on antique spring driven American time strike clock movements. Not easy to find the proper click on these units, but this assortment usually solves the problem.
launch
View Product
View moreturned_in_out Clock Weight Accessories
Grandfather Clock Weight PulleySolid brass grandfather clock weight cable pulley for Hermle / Urgos / Kieninger mechanical clock movements.
launch
View Product
View moreturned_in_out Clock Weight Accessories
Round-Edge 60mm Weight CapPolished brass tone weight shell end caps are the tops and bottom of the weight shell. Available in 60mm diameter and sold individually.
launch
View Product
View moreturned_in_out Clock Weight Accessories
Tall Case Clock PulleyTall case clock pulley for antique floor clocks. This part is what the clock weight will hang onto in the waist of the clock. It is 1 3/4 inches wide, made of brass, and has a steel S hook.
launch
View Product
View moreturned_in_out Case / Mounting Parts
Brass Bracket Clock HandleSolid brass and excellent quality brass handle for a bracket clock. Measures 3 1/2 inch wide, 1 1/2 inch tall to the top of the brass handle. A Bracket clock is a square clock case and this is the handle that mounts to the very top.
launch
View Product
View moreturned_in_out Clock Weight Accessories
Hook Clock Weight PulleySolid brass cable pulley for Urgos / Kieninger mechanical clock movements. This brass pulley is 1 7/8 inches wide and has a hook for the weight to hang.
launch
View Product
View moreturned_in_out Case / Mounting Parts
Extended Post style Clock Mounts for German UnitsExtended Post style Clock Mounts for German Units Post style mounts for German clock movements such as Hermle or Urgos. These are an unusual mount to use in a not so typical mounting of the unit. The posts have internal threads on one side that screw right on the threads of the movement post. Set of four 2 inch (5cm)... View Product
Shop By Brand