Hardware for Clocks

Showing 65–75 of 75 results

  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Brass Bell For Strike

    5 1/8" Wide round brass bell for a bell strike clock movement. Has a hole in the top and can be screwed to the wooden case. Typically mounts on the top side roof or bracket for an above strike hammer movement.

  • launch

    View Product

    View more

    turned_in_out Howard Miller

    351-350 Clock Mounting Brackets

    Clock Movement Mounting Brackets set of 2. This is for a front mounting a Hermle 351 or 350 series clock movement. Do not remove all four hex nuts on the movement plates at once or it will come disassembled.

    RC23: $10.00
  • launch

    View Product

    View more

    turned_in_out Clock Weight Accessories

    Kieninger RWS Clock Pulley

    Clock weight pulley for Kieninger RWS series movements. This holds the type of weight that is split into two weights on one time train. The RWS series weight specification calls for 9.9lbs on the time train and on this movement this weight is split into two.

    Rws-Pulley: $15.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Clock Movement Bar Mounts set of 4

    Clock movement bar mounts are flat stainless steel stock that mounts to the back of the clock movement. This allows you to have a unit that mounts in the rear. The nut comes off the pillar of the movement (one at a time so it does not disassemble). Then put this on the post, and lock it on with the... View Product

    RC22: $15.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Count Wheel Clips

    Three pack of count wheel clips for American made mechanical clocks. These clips hold the count wheel to the main wheel on a Antique time and strike clock movement.

    CP31: $5.00
  • launch

    View Product

    View more

    turned_in_out Clock Weight Accessories

    Mechanical Clock Weight Pulley WE5-2-134

    Solid brass cable pulley for Hermle, Urgos, and Kieninger mechanical clock movements. Available in two sizes 1 3/4 inch diameter or 1 1/4 inch diameter. The grandfather and grandmother clock series will take the 1 3/4 wide pulley.

    we5-2-134: $15.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Repair Brass Rivets

    An assortment of 100 brass rivets used in clock repair. These clock rivets come in a variety of sizes.

    Rivets: $15.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Clock Rivet Assortment Pack

    Pack of 100 brass rivets in various sizes and lengths. Very useful in many clock repair applications.

    CP33: $10.00
  • launch

    View Product

    View more

    turned_in_out Clock Weight Accessories

    Brass Clock Cable Pulley

    Tall-Case Brass Clock Pulley for antique floor clocks. The cable will loop through the 1 3/4" wheel and the top of the weight hooks onto the bar of the pulley.

    CP411: $20.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    French Style Bell Stand

    Solid brass stand off for a bell mount. Stand is 1/2 inch wide, 2 1/8" tall, threaded top with knurled nut for the bell, and a hole in the bottom for a screw mount.

    CP-BellMount: $10.00
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Brass Clock Dial Numerals

    Set of numerals from 1 through 12 solid brass in Arabic, made in Germany. These are one inch tall.