All Clock Parts

Showing 273–288 of 322 results

  • launch

    View Product

    View more

    turned_in_out Quartz Clock Second Hands

    Second Hands for Battery-clocks

    For quartz clock movements that take a battery. The second hands come in Black, Gold, or Red. Measured them from the mounting post to the end of the long side pointer of the hand.

    SH2: $1.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Super Long Clock Hands

    Serpentine High-Torque Clock Hands #HTH8

    Serpentine High-Torque Clock Hands for the standard "I" shaft battery clock movements.

    HTH8: $9.00
    View Product
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Serpentine Mechanical Clock Hands

    This is a set of Serpentine Mechanical Clock Hands that fit most German mechanical clock movements made after 1950. The hands are measured by the time track diameter. A time track is the small ring outside of the numerals.

    CH3Hands: $16.00$35.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Quartz Clock Hands

    Serpentine Variant Quartz Hands #H13

    Serpentine Variant Quartz Hands #H13 will fit the time only clock movement from clockworks. The hour hand will have a round hole, and the minute hand will have an oblong hole. The oblong hole just fits over the movements "I" post and than the nut goes on top to hold it down.

    H13-1: $1.00$10.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Clock Keys and Cranks

    Set of 14 Pocket-Watch Keys

    Set of 14 Pocket-Watch Keys that cover every size. This key set is for the old style key wound watches with the winder on the back side of the watch. Complete set on chain.

    WT21: $15.00
  • launch

    View Product

    View more

    turned_in_out American Mechanical Clock Hands

    Seth Thomas Clock Hands

    Hands that have an ST on them to represent Seth Thomas clock movements. For antique 8 day time strike units made in USA. Fits most American antique movements such as ST, Sessions, New Haven, Ansonia, Gilbert, and Waterbury.

    CH10: $13.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Hardware for Clocks

    Shelf Clock Pendulum Rating-Nuts

    Shelf clock pendulum rating nuts are for antique ginger bread or kitchen style type clocks. These clocks require a larger nut hole diameter usually. Also good for larger threaded rating rod diameters on antique floor clocks.

    PD17: $15.00
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    Side Chime-Block Westminster Clock

    This is a Chime-Block for a Side Chime Westminster mechanical clock movement. The length of the chime rod is measured overall and through the block itself. This measurement is 13 3/4 inches for that longest rod all the way through.

    GO1-BFlat: $70.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Side-Opening Cuckoo Clock Bellows with Tubes

    These bellows are sold as a pair and are side opening. Bellow top flaps will open along the side of the clock case towards the front of the clock. These bellow tops are 2 1/4 x 1 1/4 and are already on the tubes. The sizes in the list represent the length of the tube as well as the bellow... View Product

    CU2: $28.00$40.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Mechanical Clock Chime Rods

    SideStrike BimBam 3-rod ChimeBlock

    SideStrike BimBam 3-rod ChimeBlockk is for a 3 hammer clock and is 19 1/2 inches long tip to tip. Comes with two mounting bolts with washers. Mount to the front or back of the clock case.

    GO1.241030: $35.00
  • launch

    View Product

    View more

    turned_in_out Cuckoo Clock Parts

    Single Cuckoo Clock Hand Bushing

    Minute hand bushing that fits the style cuckoo hands that have a round hole in the minute hand. This is a single bushing.

    CU6: $4.00
  • launch

    View Product

    View more

    turned_in_out Bobs and More

    Small Mantle Clock Bob

    Mantle clock pendulum bob for antique clocks with the F-S regulator. Weight is 1.7oz and is 1 1/4 inches wide. This small size is nice if the clock is now having a hard time running with a heavier bob.

    PD10A: $15.00
  • launch

    View Product

    View more

    turned_in_out Case / Mounting Parts

    Small Wood Screw Assortment

    Ideal for case work, movement mounting, or a variety of small projects. This is the best assortment of screws for mounting mantle or cuckoo clock movements.

    CP19SM: $20.00
  • launch

    View Product

    View more

    turned_in_out American Mechanical Clock Hands

    Spade Clock Hands American

    Spade hands for antique 8 day time strike units made in America. For American antique movements such as Seth Thomas, Sessions, New Haven, Ansonia, Gilbert, and Waterbury.

    CH9: $13.00
    View Product
  • launch

    View Product

    View more

    turned_in_out Super Long Clock Hands

    Spade Super-Torque Clock Hands

    Spade super-torque quartz clock hands will only work on a super torque C cell movement. The measurement is done with the minute hand only but the hour hand will come with the set.

    HTH3: $13.00$15.00
    View Product
  • launch

    View Product

    View more

    turned_in_out German Mechanical Clock Hands

    Spade Variant Clock Hands for German Clocks

    Hour and minute Spade Variant Clock Hands that fit most German mechanical clock movements made after 1950. These are for a 6 inch time track. The measurement of the time track is how to get the correct length of hands. A time track is the small ring outside of the numerals.

    RC30: $20.00